Manual Flex VCE45 H AC (page 23 of 284) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

505253

Zoom out

Zoom in

1/284

– 7

 Remove the dirt that has accumulated

on the pure air side.

 Insert new flat-folded filter.

 Close the filter door, it must lock into

place.

 Fasten the screw of the filter cover us-

ing the screwdriver in the clockwise di-

rection.

ƽ Danger

The dust that has been collected should be

transported in dust-proof containers. No re-

filling is permitted. The waste containing

asbestos is to be disposed off according to

the rules and regulations for waste dispos-

al.

ƽ Danger

Only persons trained in waste disposal are

permitted to dispose off the dust collection

container.

Illustration

 Close the suction connection, see wet

vacuuming.

 Release and remove the suction head.

Illustration

 Pull over the safety filter sack.

Illustration

 Pull out the safety sheet.

 Close the safety filter sack using the

self-adhesive flap.

 Pull the safety filter sack towards the

rear.

Illustration

 Close tightly the opening of the suction

connection of the safety filter sack using

the closing lid.

Illustration

 Securely close the safety filter bag with

the attached cable tie.

 Remove the safety filter bag.

 Wipe the inside of the container using a

damp cloth.

 Dispose of the safety filter bag in a dust-

tight bag according to the statutory pro-

visions.

Illustration

 Affix a new safety filter bag.

Illustration

 Pull the safety filter sack over the con-

tainer.

 Insert and lock the suction head.

 Release and remove the suction head.

 Clean the electrodes with a brush.

 Insert and lock the suction head.

ƽ Danger

First pull out the plug from the mains before

carrying out any tasks on the machine.

Note:In case of a failure (e.g. filter break-

age) the appliance must be turned off im-

mediately. The failure must be remedied

before the appliance is put into operation

again.

 Check cables, plugs, fuse, socket and

electrodes.

 Turn on the appliance.

 Empty the container.

 Turn off the appliance and wait for 5

seconds, turn it on again after 5 sec-

onds.

 Clean the electrodes as well as the

space between the electrodes with a

brush.

 Remove blockages in the suction noz-

zle, suction tube, suction hose, or flat

pleated filter.

 Replace the safety filter sack.

 Ensure the filter cover properly locks

into place.

 Replace the flat pleated filter.

Replacing the safety filter sack

Cleaning the electrodes

Troubleshooting

Suction turbine does not run

Suction turbine turns off

Suction turbine does not start again

after the container has been emp-

tied

Suction capacity decreases

23EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flex VCE45 H AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flex VCE45 H AC Manual

Product: