Manual Flex VCE45 H AC (page 21 of 284) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

505253

Zoom out

Zoom in

1/284

– 5

 Set the minimum volume flow for the

suction hose cross section at the rotary

switch.

The scale displays the suction hose cross

section.

Note:To use the appliance as dedusting

device for the mobile operation (processing

tool connected to the vacuum cleaner) the

built-in monitoring must be adjusted to the

connected processing tool (dust-generat-

ing device). This means that the user must

be warned if the minimum volume flow of

20 m/s that is required for the suction is fall-

en short of.

Note: Please refer to the type plate for the

specification of the minimum volume flow in

dependence on the negative pressure.

The appliance has an innovative filter

cleaning system that is particularly effective

with fine dust. The flat pleated filter is auto-

matically cleaned every 15 seconds

through an air jet (pulsating sound).

Note: Automatic filter dedusting is switched

on at the factory.

Note: The automatic filter dedusting func-

tion can only be switched on/ off when the

appliance is switched on.

– To switch off automatic filter cleaning:

 Activate the switch. Indicator lamp in

the switch goes off.

– To switch on automatic filter cleaning:

 Press the switch again. Indicator lamp

in the switch glows green.

 Switch off the appliance at the main

switch.

 Pull out the mains plug.

 Empty the container.

 Vacuum and wipe the appliance inside

and outside with a damp cloth.

Illustration

 Store the suction hose and the mains

cable as shown in the illustration.

 Place the appliance in a dry room and

secure it from unauthorized use.

Caution

Risk of injury and damage! Observe the

weight of the appliance when you transport

it.

Ensure proper fastening of the device dur-

ing transportation.

You need to take the following measures

for dust-free transportation of the device:

 Place the suction hose with attachment

in the delivered transport sack. Close

the transport sack

 Close the suction connection, see wet

vacuuming.

 Remove the suction pipe with the floor

nozzle from the holder. Hold the appli-

ance at the handle and at the suction

pipe to transport it.

 When transporting in vehicles, secure

the appliance according to the guide-

lines from slipping and tipping over.

Caution

Risk of injury and damage! Note the weight

of the appliance in case of storage.

This appliance must only be stored in inte-

rior rooms.

ƽ Danger

First pull out the plug from the mains before

carrying out any tasks on the machine.

Dust extracting machines are safeguards

for the prevention or elimination of hazards

defined in the regulations of BGV A1.

– In order to carry out maintenance work,

the user must disassemble, clean and

service the unit, in so far as this is pos-

sible without endangering maintenance

personnel and other persons. Suitable

precautions include decontamination

Automatic filter cleaning

Turn off the appliance

After each operation

Storing the Appliance

Transport

Storage

Maintenance and care

21EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flex VCE45 H AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flex VCE45 H AC Manual

Product: