505239
9
Zoom out
Zoom in
Previous page
1/81
Next page

en OPERATING INSTRUCTIONS
OPERATING DIRECTIONS
DANGER!
Unplug the machine prior to any operations on
the machine.
Prior to initial starting:
Unpack the power tool and check the delivery
completeness and for eventual damage during
transport.
INSERTING OR REPLACEMENT THE MIXING
ATTACHMENT (FIG. B)
l
Pull the plug out of the socket.
l
Lock the adapter (9) by a spanner SW19.
Unscrew the mixing attachment (10) by spanner
SW24 in anti-clockwise direction.
l
Screw the mixing attachment onto the machine
in clockwise direction.
l
With the adapter (9) locked with spanner SW19,
screw the mixing attachment (10) with spanner
SW24 in clockwise direction.
SWITCHING ON - SWITCHING OFF
SWITCHING ON:
l
Press ON/OFF switch (4) and hold it in pressed
position.
SWITCHING OFF:
l
Release ON/OFF switch (4).
ELECTRONIC RPM CONTROL
Both models R 500FR and R 502FR are equipped
with electronic switch for rpm control. The speed
of the mixing attachment is controlled by the
pressure on the switch (4). Model R 502FR is
equipped with two-speed reduction gear. Switching
between the speeds is performed by rotating anti-
clockwise the speed selector switch (6) to 180
O
with the machine stopped.
MAINTENANCE
CAUTION!
l
The mixing attachment is still rotating for a while
after the machine has been switched off.
l
If the rotating mixing attachment touches a
surface, this may provoke a rebound.
l
The power tool shall be switched on after the
mixing attachment has already been dipped into
the mixture by smooth pressing the switch trigger
(4) until achieving maximum speed.
OVERLOAD PROTECTION
l
Upon major brief overloading, a current clutch
activates and switches the machine off until
discharging the load.
l
Upon minor long overloading, the thermal
overload protection activates and switches the
motor to a lower speed. The machine is disabled.
To enable operation again, let the machine cool
for approximately 3-5 min, and then switch the
trigger off and on again.
TECHNICAL SERVICING AND MAINTENANCE
DANGER!
Unplug the machine prior to any operation on it.
CLEANING
l
Clean the power tool and its ventilation slots
(3) regularly.
l
Clean the body inner space with the motor with
compressed dry air on a regular basis.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flex R502FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flex R502FR in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info