505239
8
Zoom out
Zoom in
Previous page
1/81
Next page
'
enOPERATING INSTRUCTIONS
Safety class according
EN 50144 – II
This power tool is supplied from singlephase
alternating current mains only. It is double
insulated according to EN 50144, IEC 60745 and
can be connected to grounded or not grounded
sockets.
NOISE
CAUTION
Wear ear defenders if sound pressure level
exceeds 85 dB (A)!
Noise levels, measured according to EN 50144,
are:
Sound pressure level L
pA
dB (A) 84
Sound power level L
WA
dB (A) 97
VIBRATIONS
Weighted acceleration, measured according to
EN 50144: 3,1 m/s
2
FOR YOUR SAFETY
DANGER!
Before initial operation of the machine, read
the documents, listed below, and only then
start to operate the machine:
l
The present Operating Instruction;
l
The “Safety Instructions”, enclosed in the
packing (indent number No 232.505/01.04)
l
The safety rules and instructions, valid for the
working place, for protection against accidents.
This power tool is manufactured according the
engineering level and the acknowledged Safety
rules.
Despite this, during operation a risk might arise
for the life of the operator or third person, as well
as damage of the tool or any other property
damage.
This power tool shall be used only:
l
for operation, in conformity with its purpose;
l
in perfect technical condition.
APPLICATION
l
for operation in industry and household;
l
for mixing low-viscosity emulsions and viscous
materials, for example: paints, lacquer, adhesives,
mortar, etc.;
l
for operating with mixing attachments and
accessories, specified in this manual or recom-
mended by the manufacturer.
SAFETY INSTRUCTIONS
DANGER!
l
The access of children to the machine is
prohibited.
l
In case the supply cable is damaged during
operation, any contact to the cable is forbidden.
Unplug the machine immediately!. Never operate
a power tool with damaged supply cable.
l
Always withdraw the plug from the power supply
socket before carrying out any work on the
machine.
l
Check the machine and the mixing attachment
prior to beginning operation for presence of
damages, unbalanced attachment and vibrations.
Perform a test trial.
l
Draw the cable behind the machine and keep it
away from the rotating parts.
Wear ear defenders and goggles
while operating the machine!
l
During operation always hold the machine with
both hands and keep proper balance.
l
Keep the power tool away from your body.
l
Switch off the power tool and let it stop before
you leave it aside.
l
Keep your hands away from rotating parts of
the machine
l
Power tools, operated outdoors or in premises
with high humidity, shall be supplied through
residual current device (actuating current - max.
30 mA).
PROPERTY DAMAGES
The power supply voltage shall correspond to the
value, indicated on the name plate with technical
data of the tool.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flex R502FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flex R502FR in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info