671467
20
Zoom out
Zoom in
Previous page
1/23
Next page
20
Troubleshooting
Fault Probable Cause Solution
Water changes color or
becomes cloudy.
Fluid Rower is in direct
sunlight or has not had
water treatment.
Change Fluid Rower location to
reduce direct exposure to
sunlight. Add water treatment
or change tank water as
directed in the water treatment
section of this manual. Consider
using distilled water to refill
tank.
Rower Belt slipping off
belt/ bungee pulley.
Bungee not under enough
tension.
Tighten bungee cord following
the instructions in "Replacing
the Bungee/Shock Cord" section
of this manual.
Front of the Rower lifts
slightly during vigorous
rowing.
M10X150mm Vertical
Seat Rail Tensioning Bolt is
slightly too loose.
Tighten bolt 1/2 turn and row
again. Tighten as needed until
problem stops. Note: Over
tightening this bolt can damage
the seat rail. Only tighten bolt in
small increments until fault is
corrected.
The Rower Computer
does not illuminate
after battery
installation.
Batteries installed
incorrectly or need
replacing.
Reinstall batteries in correct
position and try again. If the
LCD screen fails to illuminate,
try rotating the batteries
slightly in the computer. If this
fails, contact your local service
center.
The Rower Computer
screen illuminates, but
does not register when
rowing.
Loose or failed connection. Check that the computer lead
is connected properly. If it is
connected then contact your
local service center.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree NEPTUNE AR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree NEPTUNE AR in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info