671467
18
Zoom out
Zoom in
Previous page
1/23
Next page
18
Removing the Bungee Shock Cord
Upper Frame Plug
Bungee Shock Cord
Bungee Attachment Point
Move the Rowing Handle to it’s farthest
forward point on the Mainframe, then cut
the plastic end tie and follow the drawing
above for bungee removal.
Next, remove the Upper Frame Plug to
allow the Bungee Shock Cord to be
threaded through the top of the frame.
Note: You will need to rotate the Belt/
Bungee Pulley to align the holes properly.
Should the belt drop off of during the
bungee change, please refer to the previ-
ous pages for “Attaching/Reattaching the
Rower Belt”.
Upper Frame Hole
Belt/ Bungee Pulley
Once Bungee Cord and Upper Frame
Hole are aligned, push the Bungee Cord
up and through the frame as shown
Reinstall the Shock Cord through the Upper Frame, along the opposite side of Idle
Wheel, through the Mid Frame and Lower Bungee Pulleys and then tie off with plastic
tie wrap to correct tension. Replace Frame Plug.
Bungee
Shock Cord
Bungee Attachment
Point
Pull Bungee
through until
seated securely
Replacing the Bungee Shock Cord
Tip: Correct bungee tension is achieved when enough recoil is present for the
Rowing Handle to easily reach the front of the Fluid Rower Pulley Belt Bracket
at the far front of the frame. If the Rowing Handle will not reach rearward to
the end of the Seat Rail, the Bungee Cord is over-tightened and will require
adjustment.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Degree NEPTUNE AR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Degree NEPTUNE AR in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info