Manual First Alert PRO8810-600CA (page 23 of 47) (English)

795187

Zoom out

Zoom in

1/47

Page 23

ADVANCED OPERATION

ALARM

Alarm Inputs:

Alarm inputs are devices or switches that activate when a door, window, cabinet etc.

is opened or accessed. For example, you might want to only have the camera record

when someone opens a tool cabinet or when a door opens vs. recording when motion

occurs around those areas. There may be people moving by those areas frequently but

you are only concerned about when those areas are accessed. This saves hard drive

space and makes it easier to ﬁnd an event that was recorded to the hard drive.

Select Alarm in Module

Alarm Input cables of device of Alarm in: one is connected with “COM” port, the other is

connected with the port “1/2/3/4” (This should be in accordance with Alarm Input ID 1/2/3/4 in

DVR software). The below ﬁgure shows the Alarm Input cable has been connected with Port 1,

so the ID 1 should be set in DVR software.

Alarm Output:

Alarm output is used to activate an external device such as a horn or light after an

alarm is triggered. To do this the DVR uses a dry contact normally open relay. To

conﬁgure alarm outputs, connect the external device to the out connections on

the alarm block as required by the device. The maximum contact rating is 24 VDC

@ 2 A. Alarm input can start recording on any one of the camera channels.



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of First Alert PRO8810-600CA in the language / languages: English as an attachment in your email.

The manual is 2.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

First Alert PRO8810-600CA Manual

Product: