737904
12
Zoom out
Zoom in
Previous page
1/28
Next page
11
5. Computer
5. Computer
5.1 Computer inbedrijfstelling
Steek de stekker in een stopcontact en schakel de loopband
in. De AAN / UIT-schakelaar bevindt zich aan het hoofdeinde
van de loopband. Zorg ervoor dat de noodstopknop is
ingestoken, anders kan de loopband niet worden gestart.
Wanneer de stroom wordt ingeschakeld, alle lichten op het
display licht kort op. Vervolgens de tijd en afstand Windows
geeft de tellerstand kort weer. Het tijdvenster toont hoeveel
uur de loopband is in gebruik geweest en het venster Afstand
laat zien hoeveel kilometers (of mijlen als de loopband is
ingesteld op Engels lezingen; zie onderhoud voor het wijzigen
van instellingen) de loopband is verdwenen. Er verschijnt een
bericht met de melding de huidige softwareversie. De loop-
band komt dan binnen inactieve modus, wat het startpunt is
voor de bediening.
5.2.1 Quick Start:
Als het display niet actief is, drukt u op iemand
Button.
Druk op de START-knop en de loopband start met een snel
heid van 0,8 km/u. Met de Pijltoetsen kunnen worden gebru
ikt om de snelheid/helling aan te passen of u kunt de cijferto
etsen gebruiken om de snelheid/helling direct te selecteren.
Druk op de STOP-knop om de loopband te stoppen
5.2.2 Maak verbinding met de app of Bluetooth-
borstriem
Om de loopband te verbinden met een Bluetooth-borstriem
of -app, drukt u op SCAN voordat u op START drukt.
Gebruik vervolgens de pijltoetsen om te kiezen tussen APP
en BT-borstriem. Bevestig uw invoer met ENTER. Activeer
vervolgens Bluetooth op uw smartapparaat zodat het
apparaat in de app kan worden gevonden.
5.1 Computer operation
Power the treadmill on by plugging it into an appropriate
wall outlet, then turn on the power switch located at the
front of the treadmill below the motor hood. Ensure that
the safety key is installed, as the treadmill will not power
on without it.
When the power is turned on, all the lights on the display
will light for a short time. Then the Time and Distance
windows will display Odometer readings for a short time.
The Time window will show how many hours the treadmill
has been in use and the Distance window will show how
many Kilometers (or Miles if the treadmill is set to english
readings; see maintenance for changing settings) the
treadmill has gone. A message will be displayed showing
the current software version. The treadmill will then enter
idle mode, which is the starting point for operation.
5.2.1 Quick-Start Operation:
Press and release any key to wake display up if not already
on.
Press and release the Start key to begin belt movement at
0.8 kph, then adjust to the desired speed/ incline using the
Fast / Slow keys. You may also use the rapid speed/
incline keys to set to a specific speed or incline directly.
To stop the tread-belt press and release red Stop key.
5.2.2 Connect with the App or Bluetooth chest
strap
To connect the treadmill to a Blue tooth chest strap or App,
press SCAN before pressing START. Then use the arrow keys
to select between APP and BT Chestbelt. Confirm the entry
with ENTER. Then activate Bluetooth on your smart device so
that the device can be found in the App.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finnlo 3573 - Maximum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finnlo 3573 - Maximum in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info