528541
18
Zoom out
Zoom in
Previous page
1/32
Next page

5.2.2.5 Selbstdefinierte Programme P-21/P22
Bei diesen Programmen können Sie ein Profil selber
erstellen. Das große Anzeigefenster zeigt die Steigung an. Die
Geschwindigkeit wird im separaten Anzeigefenster angezeigt.
I. Haben Sie eines der selbst zu definierbaren Programme durch
Drücken der
/ oder / -Tasten ausgewählt,
dann drücken Sie die
-Taste um dieses Programm zu
bestätigen.
II. Nach dem Bestätigen erscheint im großen Anzeigefenster
„TIME“. Sie können nun durch Drücken der
/ oder
/ eine Trainingszeit zwischen 10-59 Minuten vorgeben.
Ein längeres Drücken aktiviert den Schnelldurchlauf. Um die Zeit
zu bestätigen drücken Sie die
-Taste, und Sie gelangen zur
Eingabe der gewünschten Steigung und Geschwindigkeit.
III. Im PULSE/CAL-Fesnster erscheint SE01, dies steht für das
erste Segment. Durch Drücken der
/ -Tasten können
Sie eine Steigung vorgeben, die im großen Anzeigefeld dargestellt
wird. Die dazugehörige Geschwindigkeit wird mit den
/
-Tasten eingegeben und erscheint im SPEED-Fenster.
IV. Durch Drücken der
-Taste wird dieses Segment bestätigt
und Sie gelangen zum Nächsten (SE02, SE03...). Verfahren Sie
mit den restlichen 15 Segmenten identisch. Nach dem Bestätigen
des letzen Segments startet Ihr Programm automatisch.
V. Haben Sie bereits ein Profil hinterlegt, dann können Sie
durch Drücken der
/ oder / das Programm
auswählen und mit der
-Taste sofort mit dem Training
beginnen.
VI. Während des Trainings kann die Steigung und Geschwindigkeit
durch Drücken der
/ oder / -Tasten jederzeit
geändert werden. Ein Ändern der Steigung ändert alle
Steigungswerte des gesammten Profils, die Geschwindigkeit
ändert sich nicht, außer sie wird separat manuell geändert.
Die große Anzeige zeigt die Steigung an, die dazugehörige
Geschwindigkeit wird im Geschwindigkeitsfenster angezeigt.
Fünf Sekunden, bevor das nächste Segment aktiviert wird, wird
die neue Geschwindigkeitsänderung durch eine blinkende LED
angezeigt.
5.2.2.5 Individual Programs P-21/P-22
It is possible to design your own profile. The big window shows
the incline and the speed will be shown in the speed window.
I. After you selected one of the selfdefine programs by pressing
the
/ or / - buttons, press for
confirmation.
II. After confirming, the big window shows „TIME“. You can
change the time by pressing the
/ or /
-buttons between 10-59 minutes. A longer pressing will start
the automatic value finder. Press
to confirm the exercise
time.
III. In the PULSE/CAL-window, SE01 will be shown. It stands for
the first segment. By pressing the
/ -buttons, you can
select the incline, which will be shown in the big window. The
corresponding speed, which can be changed by pressing the
/ -buttons will be shown in the speed-window.
IV. A pressing of the
-button will confirm this segment,
and the next segment (SE02, SE03...) is activated. Please
continue with the remaining 15 segments in the same way.
After confirming the last segment, the program will start
automatically.
V. Have you already set a profile, then activate the profile by
pressing the
/ or / -buttons and press the
-button to begin your exercise.
VI. During your exercise, you can change the incline and speed by
pressing the
/ or / - button at any time. If you
change the incline, the incline values of the whole profile will be
changed. The speed will be still the same. If you change the speed
separately, the whole speed profile will be changed, too. The big
window shows the incline profile/changes. The speed changes
will be shown in the separate speed window. Five seconds before
the next segment will be activated, the speed change will be
shown by a flashing LED.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finnlo 3506 ENDURANCE II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finnlo 3506 ENDURANCE II in the language / languages: English, German as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info