456443
4
Zoom out
Zoom in
Previous page
1/20
Next page
40069 Zola Predosa (BO) - ITALY
info@finicompressors.it
- GB -
Dear Customer,
thank you for choosing our product. In order to get the best performances in the use of this product, please
read carefully this manual.
To avoid incorrect operation of the equipment and possible physical risk to the operator, please read and
strictly follow the instructions contained in this manual. Note, these instructions are in addition to the safety
rules that apply in the country where the dryer is installed.
Before packing for shipment each ARTIC 134/EVO series refrigerated air dryer is subjected to a rigorous
test to ensure the absence of any manufacturing faults and to demonstrate that the device can perform all
the functions for which it has been designed.
Once the dryer has been properly installed according to the instructions in this manual, it will be ready for
use without any further adjustment.
The operation is fully automatic, and the maintenance is limited to few controls and some cleaning
operations, as detailed in the following chapters.
This manual must be maintained available in any moment for future references and it has to be
intended as inherent part of the relevant dryer.
Due to the continuous technical evolution, we reserve the right to introduce any necessary change without
giving previous notice.
Should you experience any trouble, or for further information, please do not hesitate to contact us.
IDENTIFICATION PLATE
Model
Serial No.
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temperature
Ambient Temperature
Refrigerant
Refrigerant Design Pres. HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
The product identification plate,
on the back of the dryer, shows
all the primary data of the
machine.
These data must always be
referred to the manufacturer or
to the dealer when information
or spares are needed, even
during the warranty period.
The removal or the alteration of
the identification plate will void
the warranty rights.
Model
Serial No.
Nominal Flow Rate
Max Air Pressure
Max Inlet Air Temp.
Ambient Temp.
Refrigerant
Refrig. Design Pres.
HP/LP
Electric Supply
Electric Nominal Power
Fuse Max.
Manufactured
Nl/min
barg
°C
°C
type/kg
barg
ph/V/Hz
W/A
A
www.finicompressors.com
BOLOGNA - ITALY
40069 - ZOLA PREDOSA
FINI S.p.A.
Fini
COMPRESSORS
WARRANTY CONDITIONS
For 12 months from the installation date, the warranty covers eventual faulty parts, which will be repaired or
replaced free of charge, except the travel, hotel and restaurant expenses of our engineer.
The warranty doesn’t cover any responsibility for direct or indirect damages to persons, animals or
equipment caused by improper usage or maintenance, and it’s limited to manufacturing faults only.
The right to warranty repairs is subordinated to the strict compliance with the installation, use and
maintenance instructions contained in this manual.
The warranty will be immediately voided in case of even small changes or alterations to the dryer.
To require repairs during the warranty period, the data reported on the identification plate must be notified.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finicompressors Artic 134-EVO luchtdroger at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finicompressors Artic 134-EVO luchtdroger in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info