Manual Feuerhand PYRON (page 10 of 28) (English, German, French, Spanish)

811826

Zoom out

Zoom in

1/28

ASSEMBLY

The inner casing and the outer casing (top part) of

the Fire Barrel are already riveted to one another

upon delivery. The rest of the spare parts must

be safely screwed to the body. Make sure that all

parts are upright when assembled. Wear gloves

when assembling the product in order to avoid

leaving traces of sweat, ﬁ ngerprints or dirt on the

product. These traces combined with heat can lead

to colour changes on the steel.

STEP 1:

Take the bottom of the Fire Barrel as well as one

of the mountings for the ash dish and one support

leg. Position the leg from below to the bottom of

the Fire Barrel, so that the drilling holes align.

From the inside, insert the mounting piece for

the ash dish into the bottom as a counterpart.

Then, place one of the screws provided from below

through the leg and the bottom, and screw it into

the nut that is welded on the mounting. Also ﬁ x

the second screw from the outside though the

drilling into support leg and bottom and attach

it to the mounting. Then tighten the lower screw.

Do not tighten the top, outside screw yet, as the

body will be positioned here later on.

STEP 2:

Repeat this process for the two other support legs.

STEP 3:

Now place the bottom on the support legs and

insert the ash dish.

STEP 4:

Place the body with the openings provided onto

the screws between the mounting of the ash dish

and the bottom. Now tighten the outside screws.

Insert the charcoal grate.

ENGLISCHDEUTSCH FRANÇAIS ESPAÑOL 中文

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Feuerhand PYRON in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Feuerhand PYRON Manual

Product: