778606
18
Zoom out
Zoom in
Previous page
1/93
Next page
Always use a splinterguard when working
with extraction to prevent the extraction
channels from becoming blocked.
Insert the extraction adapter in the rear
opening of the saw table so that the
hook [2-7] engages in the recess [2-8].
To remove the extraction adapter, press the
lever [2-6].
8 Working with the electric
power tool
WARNING
Risk of injury
Always secure the workpiece in such a
manner that it cannot move while being
machined.
8.1 Free guidance along a scribe mark
The triangular shape of the splinterguard [4-3]
indicates the cutting line of the saw blade. This
facilitates sawing along a scribe mark.
8.2 Plunging without pre-drilling
In order to produce plunge cuts in wood work
pieces, the saw table must be in the forward
position (base position, see fig. [1]).
Position the saw onto the workpiece with
the front edge of the saw table
and plunge the saw into the workpiece at
the maximum stroke rate and in pendulum
stroke setting 3, see fig. [6].
8.3 Temperature cut-out (only PS 300 EQ)
The power supply is restricted and the speed
reduced if the motor exceeds a certain temper
ature. The power tool continues operating at re
duced power to allow the ventilator to cool the
motor quickly. The power tool starts up again
automatically once the motor has cooled suffi
ciently.
9 Service and maintenance
WARNING
Risk of injury, electric shock
Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
Customer service and repairs must
only be carried out by the manufac
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
parts. Order no. at:
www.festool.co.uk/service
EKAT
1
235
4
Damaged safety devices and components
must be repaired or replaced in a recog
nised specialist workshop, unless otherwise
indicated in the operating instructions.
To ensure constant air circulation, always keep
the cooling air openings in the motor housing
clean and free of blockages.
9.1 Cleaning the chip ejection opening
Clean the chip ejection opening [2-9] regularly
to prevent blockages:
Remove the chip guard.
Use a brush or vacuum cleaner to clean the
chip ejection opening.
Reinsert the chip guard.
Damaged safety devices and components
must be repaired or replaced in a recog
nised specialist workshop, unless otherwise
indicated in the operating instructions.
10 Accessories
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet at "www.festool.com".
10.1 Festool FS guide system
Using the Festool FS guide system (fig. [7])
makes it easier to produce straight and precise
cuts, especially with material thicknesses of up
to 20 mm. This involves the jigsaw being inser
ted in a guide rail adapter [7-1] (order no.
490031), which is used to guide it along the
guide rail. In order to set it to have zero play,
there are two adjustable guidance jaws [7-2] on
the guide rail adapter. Only use cross-set saw
blades when using the guide rail adapter. We
recommend the S 75/4 FSG Festool saw blade.
10.2 Parallel side fence
The parallel side fence (order no. 490119) al
lows the jigsaw to be guided in parallel with the
edge of the workpiece. The parallel side fence
can be installed from both sides of the saw ta
ble:
Slide the clamp [8-1] onto the saw table
from the front.
English
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool Trion PS 300 EQ - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool Trion PS 300 EQ - 2021 in the language / languages: All languages as an attachment in your email.

The manual is 1.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info