498080
15
Zoom out
Zoom in
Previous page
1/83
Next page
ROTEX
15
GB
At the extractor connector
[1-5]
, a Festool
mobile dust extractor with an extraction hose
diameter of 27 mm can be connected.
7.8 Edge protector [9]
The edge protector
[1-1]
reduces contact of
the sanding pad circumference with a surface
(e.g. when sanding along a wall or a win-
dow), thus preventing back-kick of the ma-
chine, or machine damage.
8 Working with the machine
Observe the following instructions:
Do not overload the machine by pressing
with excessive force! The best sanding re-
sults are achieved with moderate applica-
tion pressure. The sanding capacity and
quality are mainly dependent on the selec-
tion of the correct abrasive.
Hold the machine with two hands, one on
the motor housing and one on the gear
head.
L
Tables A and B show the settings we rec-
ommend for different sanding and polish-
ing work.
9 Service and maintenance
Customer service and repair
only through manufacturer or
service workshops: Please find
the nearest address at:
www.festool.com/Service
Use only original Festool spare
parts! Order No. at:
www.festool.com/Service
To ensure constant air circulation, always
keep the cooling air openings in the motor
housing clean and free of blockages.
The machine is equipped with special carbon
brushes. If they are worn, the power is inter-
rupted automatically and the machine comes
to a standstill.
9.1 Sanding pad brake
The rubber collar
[10-1]
on the sanding pad
and the stop ring
[10-2]
on the machine
prevent uncontrolled excessive turning of the
sanding pad during eccentric motion (fine
sanding). As these parts are subject to wear
in the course of time, they must be replaced
when reduced braking force is observed (for
order no., see spare parts list).
10 Accessories
Only use original sanding and polishing pads
from Festool. Low-quality sanding and pol-
ishing pads may cause serious machine im-
balance that decreases the quality of the
working results and increases machine wear.
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
11 Environment
Do not throw the power tool in your house-
hold waste! Dispose of machines, accesso-
ries and packaging at an environmentally re-
sponsible recycling centre. Observe the valid
national regulations.
EU only:
European Directive 2002/96/EC
stipulates that used electric power tools must
be collected separately and disposed of at an
environmentally responsible recycling cen-
tre.
Information on REACh:
www.festool.com/
reach
12 EU Declaration of Conformity
WARNING
Risk of injury
X
Always secure the workpiece in such a
manner that it cannot move while being
machined.
WARNING
Risk of injury, electric shock
X
Always disconnect the mains plug from the
socket before performing maintenance
work on the machine!
X
All maintenance and repair work which re-
quires the motor housing to be opened
must only be carried out by an authorised
service workshop.
Gear-driven eccentric
sander
Serial no.
RO DX 90 FEQ 495618, 496428
Year of CE mark: 2010
EKAT
1
2
3
5
4
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool RO 90 DX FEQ ROTEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool RO 90 DX FEQ ROTEX in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 25,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info