Manual Festool RAP 80.02 E (page 12 of 62) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

498038

Zoom out

Zoom in

1/62

3 Power supply and start-up

Observe the mains voltage: The voltage and

frequency of the power source must comply with

the speciﬁ cations on the machine's identiﬁ cation

plate.

In North America, only Festool machines with the

voltage speciﬁ cations 120 V/60 Hz may be used.

On/Off switch

To switch on: Push the switch (1.1) forwards until

it engages.

To switch off: Press on the end of the switch (1.1).

This releases the switch locking in the ON position

and the switch moves to the OFF position.

4 Machine settings

Always pull the plug out of the socket

before any type of work on the machine.

4.1 Electronics

The machine features full-wave electron-

ics with the following properties:

Smooth start-up

The electronically controlled smooth start-up

ensures that the machine starts up jolt-free.

Speed adjustment

You can regulate the speed steplessly between 750

and 2300 rpm using the adjusting wheel (2.1).

Constant speed

The preselected motor speed remains constant

through electronic control. This ensures a uniform

cutting speed even when under strain.

Temperature cut-out

To protect against overheating (burning out of mo-

tor), an electronic temperature monitoring system

has been installed. Prior to reaching a critical mo-

tor temperature, the safety electronics switches

off the motor. After a cooling time of approx. 3-5

minutes, the machine can be operated again at

full load. The machine requires less time to cool

down if it is running, i.e. in neutral.

4.2 Installing polishing pad

– Press spindle stop (1.4).

– Screw the polishing pad (1.2) onto the spindle,

or unscrew from the spindle.

Press spindle stop only with the drive

spindle stationary. Never switch on the

motor with spindle stop pressed.

4.3 Auxiliary handle

The auxiliary handle (1.3) can be screwed onto

either the right or left of the gear head.

4.4 Securing polishing attachments

Only use polishing pads pads with an

undamaged burr layer.

Due to the PoliStick system, the polishing materi-

als (felt, sponge, sheepskin) are simply pressed

onto the polishing pad (1.4) and held in place by

the adhesive coating on the polishing pad.

5 Working with the machine

For safe guidance, hold the machine with both

hands on the motor housing (1.6) and on the gear

head (1.5) and/or the auxiliary handle (1.3).

Do not overload the tool by pressing on it too hard.

The best polishing results are achieved by working

with a moderate contact pressure.

6 Accessories

Use only original Festool accessories and

Festool consumable material designed

for this machine because these system

components are designed speciﬁ cally for

the machine.

Using accessories and consumable material from

other suppliers will most likely affect the quality

of your working results and limit any warranty

claims. Machine wear or your own personal work-

load may increase depending on the application.

Protect yourself and your machine, and preserve

your warranty claims by always using original

Festool accessories and Festool consumable

material!

Use only original Festool polishing pads.

Low-quality polishing pads may cause se-

rious machine imbalance that decreases

the quality of the working results and

increase machine wear.

The order numbers of the accessories and tools

can be found in the Festool catalogue or on the

Internet under "www.festool.com".

7 Service and maintenance

Always pull the plug out of the socket

before any type of work on the machine!

All maintenance and repair work which

requires the motor housing to be opened,

must only be carried out by an authorised

service workshop.

To ensure constant air circulation, always keep the

cooling-air openings in the motor housing clean

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool RAP 80.02 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool RAP 80.02 E Manual

Product: