498038

Festool RAP 80.02 E Manual

10
Zoom out
Zoom in
Previous page
1/62
Next page
10
Rotary polisher
Technical specifi cations RAP 80.02 E
Power 500 W
Rotational speed 750 – 2300 rpm
Polishing pad up to dia. 80 mm
Connecting thread of drive shaft M 14
Weight (without cable) 1.6 kg
Protection class
/ II
The specifi ed illustrations are at the beginning of
the Operating Instructions.
Graphical symbols
Caution. Danger!
Read the operating instructions/notes
Wear ear protection!
1 Intended use
The machine is designed for polishing painted
surfaces.
To guarantee electrical safety, the machine must
not be damp nor operated in a damp environ-
ment.
The user bears the responsibility for dam-
age and accidents caused by improper
use.
2 Safety instructions
2.1 General safety instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
• Never allow children to use the machine.
2.2 Machine-related safety instructions
- This power tool is intended to function as a
polisher. Read all saftey warnings, instructions,
illustrations and specifi cation provided with
this power tool. Failure to follow all instructions
listed below may result in elektric shock, fi re and/
or serious injury.
- Operations such as grinding, sanding, wire
brushing or cutting-of are not recommended to
be performed with this power tool. Operations
for wich the power tool was not designed may
create hazard and cause personal injury.
- Do not use accessories which are not specially
designed and recommended by Festool. Just
because the accessory can be attached to your
power tool, it does not assure safe operation.
- The rates speed of the accessory must be at
least equal to the maximum speed marked in
the power tool. Accessories running faster than
their rated speed can break and fl y apart.
- The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool. Incorrectly sized accessories
cannot be adequately guarded or controlled.
- The arbour size of wheels, fl anges, backing
pads or any other accessory must properly fi t
the spindle of the power tool. Accessories with
arbour holes that do not match the mounting
hardware of the power tool will run out of bal-
ance, vibrate excessively and may cause loss of
control.
- Do not use a damaged accessory. Before each
use inspect the accessory such as abrasive
wheels for chips and cracks, backing pad for
cracks, tear or excess wear, wire brush for
loose or cracked wires. If power tool or acces-
sory is dropped, inspect for damage or install
an undamaged accessory. After inspecting and
installing an accessory, position yourself and
bystanders away from the plane of the rotating
accessory and run the power tool at maximum
no-load speed for one minute. Damaged acces-
sories will normally break apart during this test
time.
- Wear personal protective equipment. Depending
on application, use face shield, safety goggles or
safety glasses. As appropriate, wear dust mask,
hearing protectors, gloves and workshop apron
capable of stopping small abrasive or workpiece
fragments. The eye protection must be capable
of stopping fl ying debris generated by various
operations. The dust mask or respirator must be
capable of fi ltrating particles generated by your
operation. Prolonged exposure to high intensity
noise may cause hearing loss.
- Keep bystanders a safe distance away from
work area. Anyone entering the work area must
wear personal protective equipment. Fragments
of workpiece or of a broken accessory may fl y
away and cause injury beyond immediate area
of operation.
- Position the cord clear of the spinning acces-
sory. If you lose control, the cord may be cut or
snagged and your hand or arm may be pulled into
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool RAP 80.02 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool RAP 80.02 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info