Manual Festool PSBC CARVEX 420 EB (page 22 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

497995

Zoom out

Zoom in

1/132

C A R V E X

Mount the adaptation table

[9-1]

on the

saw table support.

Close the change lever

[1-8]

Ensure that the adaptation table is firmly seat-

ed in the guide.

Use the extractor connector

[1-7]

also

with the adaptation table.

Adaptation to the guide rail FS 2

The Festool guide system FS 2 (Fig.

[10]

)

makes it much easier to manufacture straight

precision cuts.

Place the jigsaw with attached adaptation

table

[9-1]

on the guide rail.

Adaptation to the circle cutter

The circle cutter can be used to create circular

cuts with a diameter between

120

and

3000

mm. The circle cutter can be installed from

both sides on the adaptation table.

Place the jigsaw with attached adaptation ta-

ble on the adapter

[11-1]

on the circle cut-

ter.

Insert the centring mandrel

[11-2]

in the

hole

[11-4]

on the circle cutter aligned

with the saw blade.

Clamp the measuring tape to the circle cut-

ter using the rotary knob

[11-5]

Recommended when using the circle cutter:

Cut in an anticlockwise direction.

Work at a slow rate of advance.

Set the pendulum stroke

[1-11]

to 0 - 1.

Set the stroke rate

[1-5]

to 1 - 5.

Store the centring mandrel in the depot

[11-3]

11 Transport

The equivalent amount of lithium in the LiIon

battery pack is less than the applicable limit

value and certified as per UN manual ST/SG/

AC.10/11/rev. 3 part III, subsection 38.3. The

LiIon battery pack is therefore not subject to

national and international dangerous goods

regulations, neither as an individual compo-

nent nor as a fitted machine component. How-

ever, dangerous goods regulations may apply

when several battery packs are transported, in

which case you may have to fulfil special con-

ditions. Refer to ADR special regulation 230 for

more information relevant for the EU.

12 Environment

Do not dispose of the device in

household waste!

Recycle devices,

accessories and packaging. Observe

applicable country-specific regulations.

EU only:

European Directive 2002/96/EC stip-

ulates that used electric power tools must be

collected separately and disposed of at an en-

vironmentally responsible recycling centre.

Return

used or faulty battery packs

to your

local specialist retailer, Festool after-sales ser-

vice or a designated public waste manage-

ment facility. The battery packs will then be

recycled. (Observe the regulations applicable

in your country). The batteries must be dis-

charged on return.

EU only:

European Directive 91/157/EEC

stipulates that faulty or used battery packs/

batteries must be recycled.

Information on REACh:

www.festool.com/reach

13 EU Declaration of Conformity

We declare under sole responsibility that this

product complies with the following directives

and standards:

2006/42/EC, 2004/108/EC, EN 60745-1, EN

EN 60745-2-

, EN 55014-1, EN 55014-2.

We declare under sole responsibility that this

product complies with the following directives

and standards:

2004/108/EC, 2006/95/EC, 2011/65/EU (af-

ter 03.01.2013), EN 60335-1, EN 60335-2-29,

EN 61000-3-2, EN 61000-3-3, EN 61204-3.

Festool Group GmbH & Co. KG

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Johannes Steimel

Head of Research, Development and Technical

Documentation

15.05.2012

Cordless jigsaw Serial no.

PSBC 420 EB 10003824

PSC 420 EB 10003823, 10005015

Year of CE mark: 2012

Charger Serial no.

TRC 3 494635, 494636, 494637

Year of CE mark: 2007

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool PSBC CARVEX 420 EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool PSBC CARVEX 420 EB Manual

Product: