497992
14
Zoom out
Zoom in
Previous page
1/107
Next page
14
C A R V E X
GB
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
Festool electric power tools must only
be installed on work tables provided by
Festool for this purpose.
If the tool is in-
stalled in another, or self-made, work table,
it can become unstable and result in serious
accidents.
Wait until the power tool stops com-
pletely until placing it down.
The tool can
become entangled and lead to a loss of con-
trol of the power tool.
Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
Always place the pendulum jigsaw on the
workpiece with the saw blade running.
Wear suitable protection such as ear protec-
tion, safety goggles, a dust mask for work
which generates dust, and protective gloves
when working with raw materials and when
changing tools.
Always secure the workpiece in such a man-
ner that it cannot move while being sawed.
Always connect the machine to a dust ex-
tractor when work involves dust generation.
– Check the plug and the cable regularly and
should either become damaged, have them
replaced by an authorised after-sales ser-
vice workshop.
Stroboscopic light can cause epileptic
seizures.
Do not use this machine if you are
susceptible to epileptic seizures.
Do not look into the stroboscope light. Look-
ing into the light source can damage your vi-
sion.
5.3 Metalworking
The following precautions are to be tak-
en when processing metals for safety
reasons:
Pre-connect a residual current circuit-break-
er (FI, PRCD).
– Connect the machine to a suitable dust ex-
tractor.
Clean tool regularly of dust accumulations in
the motor housing.
5.4 Emission levels
Levels determined in accordance with EN
60745 are typically:
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K measured
in accordance with EN 60745:
Wear protective goggles.
Sound pressure level L
PA
= 88 dB(A)
Noise level L
WA
= 99 dB(A)
Measuring uncertainty
allowance
K = 3 dB
CAUTION
Operating noise
Damage to hearing
X
Use ear protection!
PS 420 EBQ PSB 420 EBQ
Sawing wood
Handle a
h
=6,0 m/s
2
a
h
=10,0 m/s
2
K = 2,0 m/s
2
K = 2,0 m/s
2
Gear
head
a
h
=11,0 m/s
2
K = 2,0 m/s
2
Sawing metal
Handle a
h
=7,0 m/s
2
a
h
=11,0 m/s
2
K = 2,0 m/s
2
K = 2,0 m/s
2
Gear
head
a
h
=12,0 m/s
2
K = 2,0 m/s
2
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool PS CARVEX 420 EBQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool PS CARVEX 420 EBQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info