383568
15
Zoom out
Zoom in
Previous page
1/86
Next page
TRION
15
GB
L
When working with suction units, always
use a splinterguard in order to prevent the
suction channels becoming blocked.
X
Insert the extractor adapter into the rear
hole of the base runner in so that the hook
[2-6] catches in the notch [2-7].
X
Press the lever [2-5] to remove the ex-
tractor adapter.
7.6 Adjusting the base runner
The base runner can be swivelled to both
sides by up to 45° for bevel cuts.
X
Remove chip guard and splinterguard,
X
release locking screw [4-1] with Allen key
[1-4],
X
push base runner approx. 5 mm forwards,
X
set desired inclination according to the
scale [5-2],
X
tighten locking screw [4-1].
Für randnahes Sägen kann der Sägetisch
nach hinten versetzt werden
X
Remove chip guard and splinterguard,
X
release locking screw [4-1] with Allen key
[1-4],
X
push base runner to rear position so that
the centring pin [5-1] fits in the opening
[5-3],
X
tighten locking screw [4-1].
7.7 Adjusting the pendulum stroke
In order to process different materials with
an optimum feed movement the pendulum
jigsaws have an adjustable pendulum stroke.
Select the desired setting with the pendulum
stroke switch [1-5]:
setting 0 = pendulum stroke off
setting 3 = maximum pendulum stroke
7.8 Adjusting the number of strokes
PS 300 EQ, PSB 300 EQ
You can regulate the number of strokes step-
lessly between 1000 and 2900 min
-1 using the
adjusting wheel
[1-2; 2-3]. This enables you to
optimise the cutting speed to suit the mate-
rial.
8 Working with the machine
8.1 Free hand according to the
scribe mark
The triangular shape of the splinterguard [4-
3] shows the cutting line of the saw blade
and thus facilitates cutting to a scribe mark.
8.2 Plunge cutting without pilot
drilling
The base runner must be in the front position
for plunge cuts in timber materials (basic
setting, see Figure [1]).
X
Place saw on the front edge of the runner,
X
set saw to maximum no. of strokes and
pendulum stroke setting 3 and start the
plunge cut into the workpiece (Figure
[6]).
9 Service and maintenance
Recommended settings of the pendu-
lum stroke
Hard and soft wood,chip board,
wood fibre board
1 - 3
Wood core plywood, plywood, plas-
tics
1 - 2
Ceramic 0
Aluminium, NF metals 0 - 2
Steel 0 - 1
Recommended number of strokes
(adjusting wheel setting)
Hard and soft wood, wood core ply-
wood, plywood, chip board
6
Wood fibre boards 4 - 6
Plastics 3 - 6
Ceramic, aluminium, NF metals 3 - 5
Steel 2 - 4
WARNING
Risk of injury
X
Always secure the workpiece in such a
manner that it cannot move while being
machined.
WARNING
Risk of injury, electric shock
X
Always disconnect the mains plug from the
socket before performing maintenance
work on the machine!
X
All maintenance and repair work which re-
quires the motor housing to be opened
must only be carried out by an authorised
service workshop.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool ps 300 ebq at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool ps 300 ebq in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info