382955
10
Zoom out
Zoom in
Previous page
1/15
Next page
10
3.4 Fitting the splinterguard
The splinterguard allows cuts with splinter-free edges, even
on the exit side of the saw blade.
- With the tool switched off, fit the splinterguard (5.1) on the
guide (5.2) up to the saw blade.
- Switch the jigsaw on and with the tool running, push the
splinterguard in and cut on a level surface until the
splinterguard is flush with the front edge of the base runner.
Note: The splinterguard must lie close to the saw blade on
both sides to ensure its reliable operation. Thus, a new
splinterguard should be fitted every time the saw blade is
changed to ensure splinter-free cuts.
3.5 Fitting the chip guard
The chip guard prevents chips from flying off and improves
the efficiency of the chip extractor.
- The chip guard (6.1) is installed from the front between the
table and the closure cover. By pressing lightly, the chip guard
moves in notches on both sides in the slots (6.2) of the drive
cover.
3.7 Adjusting saw blade guide
The pendulum jigsaws have an additional hard metal guide
(8.3) immediately above the workpiece for a better guidance
of the saw blade.
- Tighten the screw (8.4) with a screwdriver until the jaws
almost rest against the saw blade.
The saw blade shall still be able to be moved
easily!
3.8 Changing saw blades
- Place swivel stroke switch (8.2) into position III.
- Loosen clamp screw (8.1) with Allen wrench (included with
the saw).
- Remove the fitted saw blade.
- Insert saw blade into the clamp shoe as far as the stop.
- Tighten clamp screw.
4 Working with the machine
Check the tight fit of the saw blade before starting
work.
Always place the pendulum jigsaw on the workpiece with the
saw blade running.
4.1 Free hand according to the scribe mark
The triangular shape of the splinterguard (9.1) shows the
cutting line of the saw blade and thus facilitates cutting to a
scribe mark.
3.6 The chip extractor
Without an additional adapter, an extraction device can be
connected to the PS 2 E.
- The sleeve (7.1) of the suction hose, dia. 27 mm, is pushed
onto the extraction nozzles (7.2).
The integrated blow-off system comes into effect if working
with an extractor. A directed jet of air ensues that chips do
not obscure the scribe mark.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool ps 2 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool ps 2 e in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info