574995

Festool PALLAS50 Manual

11
Zoom out
Zoom in
Previous page
1/59
Next page
@
1
Scope
of
delivery
"Basis
1 AfT"
work
module
1.1
Portable circular saw guide
1.2 Bolt
to
fasten the riving knife
to
the "Basis Plus"
base
1.3 Protective cover with support
1.4 Switch
clip
1.5 Bolts
to
fasten the guide handle to the "Basis
Plus"
1.6 Guide handle
1.7 "Basis WRA
500" mitre fence
"Mod
1 A / ATF 55
E"
trim
saw
module
The "Mod 1
AI
ATF
55 E" trim saw module consists
of the "Basis 1
AlT'
work module
and
the
ATF
55 E
portable circular saw (already litted belore delivery).
"Basis
1
A"
Basis-Set
The "Basis 1
A"
Basis-Set consists
01
"Mod 1 A /
ATF
55
E"
the trim saw module and "Basis Plus" base unit.
"Palfas
50"
Basis-Set
The
"Pallas 50" Basis-Set consists of the "Basis 1
AI
T" work module, the
ATF
55 portable circular saw
and "Basis
Plus" base unit without loldaway legs.
2 Technical data
Max. length
01
cut (as trim saw)
Length of cut (as trim saw)
at
12
mm thickness
Cutting depth
- at 90" position
- at 45" position
Bevel adjustment
Tablesize
Table
height
- with foldaway legs
- without foldaway legs
Weight
3
Correct
use
240mm
230mm
0-50mm
0-33mm
0"-45"
650
x
495mm
820mm
310mm
26
kg
The "Basis 1 AlT" work module
is
used to lit the
Festool portable circular
ATF
55,
ATF
55 E or ATF 55
EB.
Other portable circular saws may not be used
lor safety reasons.
The "Basis 1
AlT" work module and "Mod 1 A /
ATF
55
E"
trim saw module have been designed for cor-
reet
use and installation
in
the "Basis Plus" base
unit.
The "Basis 1
A",
"Pallas 50" Basis-Set has been
designed to cut wood, wood-like materials and pla-
stics in consideration of their technical data.
If the
portable circular saw is fitted with Festool saw blade
439686
it
can also be used to cut aluminium.
The "Basis 1
A",
"Pallas 50" Basis-Set can be opera-
ted
by one person. The working position
is
in
front of
the table to the left of the saw (Fig.
16
and 17).
The "Basis 1
A",
"Pallas 50" Basis-Set should not be
operated or stored outdoors or
in
a wet environ-
ment.
The users shall be liable for damages and accidents
due to incorrect use.
4 Please read before
starting
work
4.1
Safety
instructions
Pie
ase
read the following salety instructions, the
safety instructions on the enclosed leaflet
and
the
operating instructions for the portable circular saw
before starting work
- Check that the saw
is
fastened properly
in
the
work module and that the work module
is
fixed
to
the "Basis Plus" before starting the tool
-
If
used
as
a trim or bench saw the protective
cover and support must be fastened
to
the guide
( Exception: concealed cuts) The protective cover
must
be
lowered workpiece.
- The workpieces must always be guided with or
laid against a stop.
- Keep a safe distance away from moving saw bla·
des: keep your fingers together when working.
Use a guide handle for longitudinal cuts
in
work-
pieces narrower than
120 mm.
00
not remove
loose splinters, chips and similar materials from
near the moving saw blade with your hands.
- Ensure that cuttings
are
not caught
in
the teeth of
the saw blade and
Ily off in all directions.
- The "Basis 1
A",
"Pallas 50" Basis-Set may not
be
used
to
cut firewood.
- Circular wood must be held on both sides
of
the
saw blade when cutting
to
stop
it
from twisting.
- The table
of
the guide unit may not display any
damages, e.g. nicks on the saw gap.
II
it
does,
have this replaced
by
the Festool service depart-
ment.
- Support long workpieces on the delivery side.
4.2 Residual
risks
Risks may still arise despite the observance or
all
building regulations, e.g. through:
- workpiece parts flying off,
- damaged tool parts flying off,
- wood dust emissions,
- noise emissions.
5
Construction
5.1
Setting
up
the
"Basis
Plus"
base
unit
("Palfas
50"
Basis-Set
without
foldaway
legs)
The foldaway legs (2.1) are screwed
in
pi
ace at the
joints (2.5) after unfolding.
The "Basis Plus" base unit should be placed
on
firm,
smooth base. Adjust the
bevelled caps (2.2)
on
!wo
legs so that the "Basis Plus" base unit does not
wobble.
Screw the bolts (1.5) into the threads (3.2),
so
that
the guide handle can be hung on these.
5.2
Locking
the
connecting
rod
The connecting
rod
is
released
by
pressing lightly
against the handle (4.1) and can then
be
pulled for·
wards. The connecting rod can
be
locked
in
!wo
positions with the lever (4.3):
- Groove (4.4) = front position,
- Groove (4.2) = rear position.
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool PALLAS50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool PALLAS50 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info