778808
18
Zoom out
Zoom in
Previous page
1/110
Next page
18
LHS-E 225
GB
To protect the sanding pad and the sanding
head, always transport and store the power tool
in the accompanying carry bag without the
sanding discs.
9 Service and maintenance
Customer service and repair
only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
Only use original Festool spare parts!
Order No. at: www.festool.com/service
Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of any obstruction.
In the event of a slowdown in performance or in-
creased vibrations, blow and clean cooling air
openings.
9.1 Cleaning the cool air filter [8]
If the cool air filter is blocked, the motor may not be
sufficiently cooled and the power tool may switch
off after three beeps because the temperature is
too high.
Clean all cool air openings on a regular basis.
Remove the filter sieve on the sanding head.
Remove any deposits in the sieve.
Remove any deposits in the openings in the
housing.
Insert the filter sieve until it engages.
Let the power tool cool down for approx. 15 minutes
before using it again.
10 Accessories
Use only original Festool sanding pads. Low-quality
sanding and polishing pads may cause serious ma-
chine imbalances that decrease the quality of the
work results and increase wear on the power tool.
Festool provides comprehensive accessories which
allow you to use your power tool effectively and for
diverse applications, e.g.
Additional hand grip ZG-LHS 225
Harness TG-LHS 225
Mobile dust extractor CTL/M 36 E AC
PLANEX
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
11 Environment
Do not dispose of electric power tools in house-
hold waste!
Recycle devices, accessories and
packaging. Observe applicable country-specific
regulations.
EU only:
In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
12 Troubleshooting
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
EKAT
1
235
4
2
3
4
Problem Possible causes Remedy
LHS-E 225 does not run
smoothly over the sur-
face.
Hard spackling paste or hard
sub-layers
Reduce speed.
Deformed sanding pad Use a new sanding pad.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool LHS-E 225 EQ Planex Easy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool LHS-E 225 EQ Planex Easy in the language / languages: All languages as an attachment in your email.

The manual is 12.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info