778809
21
Zoom out
Zoom in
Previous page
1/172
Next page
shop in order to ensure that your device op
erates reliably.
Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
2.4 Emission levels
The levels determined in accordance with
EN 62841 are typically:
LHS 2 225 EQI/LHS 2 225 EQ
Sound pressure level LPA = 86 dB(A)
Sound power level LWA = 97 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
LHS 2 225 EQI/LHS 2 225 EQ ah < 2.5 m/s2
K = 1.5 m/s2
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
The long-reach sander is designed for sanding
primed drywall constructions, ceilings and
walls indoors as well as for removing carpet
residue and coats of paint indoors.
A maximum of two extension tubes can be
used.
The long-reach sander is not suitable for wet
sanding and for working with oil and polishing
agents.
Not suitable for continuous industrial opera
tion.
The user is liable for improper or non-in
tended use.
4 Technical data
Long-reach sander LHS 2 225 EQI/
LHS 2 225 EQ
Power 400 W
Speed (no-load) 5000–8500 rpm
Sanding stroke 4 mm
Backing pad diameter 220 mm
Abrasive diameter 225 mm
Dust extraction connec
tion 36 mm (27 mm)
Frequency 2402 Mhz –
2480 Mhz
Equivalent Isotropically
Radiated Power (EIRP) <10 dBm
Short version length
(without extension tube) 1.2 m
Long version length
(one extension tube) 1.65 m
Weight as per EPTA-Procedure 01:2014
Long version (one ex
tension tube) 4.7 kg
Short version (without
extension tube) 4 kg
This tool has a light source of energy efficiency
class E.
5 Parts of the device
[1-1] Handle
[1-2] Bluetooth® button (only
LHS 2 225 EQI)
[1-3] LED indicator (only LHS 2 225 EQI)
[1-4] Surface control light button
[1-5] On/off switch
[1-6] T-handle
[1-7] Hose clip
English
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool LHS 2 225 EQI PLANEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool LHS 2 225 EQI PLANEX in the language / languages: All languages as an attachment in your email.

The manual is 3.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info