Manual Festool LEX 3 125 3 (page 16 of 101) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499937

Zoom out

Zoom in

1/101

LEX 3

stored in a dry, inaccessible or locked loca-

tion, out of the reach of children.

–

Do not use the compressed air hose for

purposes for which it was not intended.

Protect the compressed air hose from heat,

oil and sharp edges. Check the compressed

air hose regularly and if it becomes damaged,

have it replaced by an approved specialist.

The compressed air hose cannot be used for

application devices such as atomising and

spraying equipment as the safety require-

ments against electrical hazards cannot be

satisfied.

–

Take good care of your tools.

Keep the

tools sharp and clean to enable better and

safer work. Follow the maintenance regula-

tions and the information about tool replace-

ment. Keep handles dry and free of oil and

grease.

–

Do not leave any tool key inserted.

Be-

fore switching on check that key and adjust-

ment tools are removed.

–

Avoid unintended start-up

. Do not carry a

compressed air tool that is connected to a

compressed air supply with your finger on the

trigger. When connecting the compressed air

hose to a compressed air supply, make sure

that the switch is not activated.

–

Be alert!

Pay attention to what you are do-

ing. Always work with care.

Do not use the compressed air tool if you are

not able to concentrate properly.

–

Have

your compressed air tool repaired by a

qualified specialist.This compressed air tool

corresponds to the relevant safety regula-

tions. Repairs should only be carried out by a

qualified specialist. The operator is otherwise

at risk of an accident.

–

Only work with correctly processed

compressed air.

Using the Festool supply

unit VE guarantees this.

5.2 Other risks

In spite of compliance with all relevant design

regulations, dangers may still present them-

selves when the machine is operated, e.g.:

– Workpiece parts being thrown off,

– Parts of damaged tools being thrown off,

– Noise emissions,

– Dust emissions.

5.3 Emission levels

Levels determined in accordance with EN ISO 15744/ISO 28927 are typically:

*For information: According to the old EN ISO 8662.

The specified emissions values (vibration,

noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise

loads during operation.

– They represent the primary applications of

the power tool.

Increase possible for other applications, with

other insertion tools or if not maintained ad-

equately. Take note of idling and downtimes

of machine!

Version Sound pressure level /

Sound power level

Vibration emission level

3 directions 1 direction*

PFA

/ L

Uncertainty a

Uncer-

tainty K

Uncertainty

[dB(A)] [m/s²] [m/s²] [m/s²] [m/s²]

LEX 3 77/2,5 72 / 83 3 < 2,5 3,0 < 2,5 3,0

LEX 3 125/3 70 / 81 3 4,4 1,5 < 2,5 1,5

LEX 3 125/5 72 / 83 3 5,0 1,5 < 2,5 1,5

LEX 3 150/3 72 / 83 3 3,7 3,0 < 2,5 3,0

LEX 3 150/5 72 / 83 3 3,9 3,0 2,7 3,0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool LEX 3 125 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool LEX 3 125 3 Manual

Product: