Manual Festool LEX 3 125 3 (page 14 of 101) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499937

Zoom out

Zoom in

1/101

LEX 3

noring warning notes and instructions may re-

sult in serious injuries.

– Only trained and qualified persons are per-

mitted to set up, adjust and operate this

compressed air tool. Persons without the rel-

evant qualifications and training are more

likely to cause accidents.

– This compressed air tool may not be modi-

fied. Modifications may reduce the effective-

ness of safety devices and pose a greater risk

to operating personnel.

– Keep all of the attached documents and pass

on the documentation if the machine changes

ownership.

– Never use a damaged compressed air tool.

– Regularly inspect compressed air tool. The

compressed air tool must be marked with

clearly legible rated values and markings. Re-

placement signs can be ordered from the

manufacturer.

Danger from ejected parts

– In the event the workpiece, accessory or ma-

chine parts break parts may be ejected at

high speed.

– Wear impact-resistant protective goggles.

– Wear a helmet when doing overhead work.

Also assess the risks for other people.

– Secure the workpiece. Use clamping devices

or a vice to hold the workpiece firmly.

Risk of getting caught

– Wear suitable protective clothing! Do not

wear loose clothing or jewellery. They can be

caught by moving parts. Wear a hair net if

you have long hair.

Risks during operation

– Wear protective gloves.

– Operating and maintenance personnel must

be physically strong enough to handle the

size, weight and power of the machine.

– Hold the machine correctly. Prepare to coun-

teract normal or sudden movements - hold

the machine with both hands.

– Avoid abnormal posture. Ensure secure

stance and keep your balance at all times.

– Enable the command device for starting and

shutting down in case of an interruption to

the energy supply.

– The machine can only be operated with abra-

sives which were developed for this purpose.

– Wear protective goggles, protective gloves

and protective clothing.

– Check sanding pad before each use. Do not

use the sanding pad if it is torn, broken or has

fallen.

– Avoid direct contact with the sanding pad.

Wear suitable gloves as protection.

– Never use without an abrasive.

– Risk of an electrostatic discharge if the com-

pressed air tool is used on plastic and other

non-conductible materials.

– Potentially explosive atmosphere: If explo-

sive or self-igniting dust is produced during

sanding of certain materials, the processing

instructions of the material manufacturer

must be observed under all circumstances.

Risk through repeated movements

– The use of the compressed air tool may cause

unpleasant sensations in the hands and arms

of the operator, as well as in the neck and

shoulder area or other body parts.

– Adopt a comfortable posture. Change posture

if working continuously.

– If symptoms such as malaise, complaints,

throbbing, pain, tingling, numbness, burning

or stiffness occur inform your employer and

consult a doctor.

Risk as a result of accessory parts

– Disconnect the compressed air hose from the

compressed air supply. In the event of non-

use of the compressed air tool, before main-

tenance and when changing insertion tools.

– Avoid contact with the insertion tool during

and after use.

– Always use original accessories.

– Grinding wheels and cutting-off wheels are

not permitted.

– The permissible rotational speed of the ac-

cessory must be at least 1,000 rpm higher

than the maximum speed specified on the

machine. Accessories that rotate faster than

the permissible level can rupture.

– Self-adhesive abrasives must be attached

concentrically on the sanding pad.

Risk at work station

– Slipping and tripping hazard! Pay attention to

slippery surfaces and tripping hazards as a

result of air pressure hoses.

– Not intended for use in explosive atmo-

spheres and not insulated against contact

with electrical power sources.

– Proceed with caution in unfamiliar surround-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool LEX 3 125 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool LEX 3 125 3 Manual

Product: