Manual Festool LEX 2 150 3 (page 15 of 70) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499931

Zoom out

Zoom in

1/70

material from surfaces and for sanding edges.

- Soft: universal for coarse and ﬁ ne sanding, with

elastic structure for even and curved surfaces.

- Super soft: high elasticity, for smooth ﬁ ne sand-

ing of moulded parts, curves, radii.

Do not use super soft pads with the Lex 2

150/11!

Do not use on edges.

Assembly - see Fig. 4. Make sure the position of

the positive-ﬁ t supports of the sanding pads (4.1)

and the machine (4.2) is congruent.

4.4 Abrasive

Self-adhesive abrasives, such as Stickﬁ x sand-

paper, and sanding cloths can be afﬁ xed to the

Stickﬁ x sanding pads.

The abrasives are simply pressed onto the sanding

pads and removed after use.

The abrasives must be afﬁ xed concentri-

cally and the holes aligned with those on

the sanding pad.

5 Maintenance and care

The machine should always be discon-

nected from the compressed air supply

before any work is carried out on the

machine.

Any maintenance or repair work requiring the

motor housing to be opened may only be carried

out by an authorised service workshop.

5.1 Vanes

We recommend that the vanes on the motor be

replaced after approx. 500 operating hours.

5.2 Sanding pad brake

The collar (5.1) makes contact with the sanding

pad, thus preventing the sanding pad from vibrat-

ing uncontrolledly.

This collar wears out over time and must be re-

placed should brake fading occur. The sanding pad

must be removed for this. You can then remove the

collar from the snap-on fastener (5.2) and replace

it with a new one.

5.3 Lubrication

If the machine is not used for longer periods, e.g.

for a weekend, introduce 1 or 2 drops of lubricat-

ing oil into the compressed-air supply (5.3) on the

machine prior to use.

5.4 Replacing the silencer

The silencer on the IAS 2 connecting piece must

be replaced at regular intervals to maintain the

power of the pneumatic tool.

5.5 Cleaning the extraction channels

We recommend that the extraction channels in

the machine (5.4) be cleaned using a small pipe-

cleaner brush or a cloth once a week (especially

when sanding resin ﬁ ller).

6 Accessories, tools

Use only original Festool accessories and Festool

consumable material designed for this machine

because these system components are designed

speciﬁ cally for the machine. Using accessories

and consumable material from other suppliers

will most likely affect the quality of your working

results and limit any warranty claims. Machine

wear or your own personal workload may increase

depending on the application. Protect yourself and

your machine, and preserve your warranty claims

by always using original Festool accessories and

Festool consumable material!

7 Disposal

Do not throw the tool in your household waste!

Dispose of machines, accessories and packaging

at an environmentally responsible recycling cen-

tre. Observe the valid national regulations.

8 Warranty

Our equipment is under warranty for at least 12

months with regard to material or production

faults in accordance with national legislation. In

the EU countries, the warranty period is 24 months

(an invoice or delivery note is required as proof of

purchase). Damage resulting from, in particular,

normal wear and tear, o-verloading, improper

handling, or caused by the user or other damage

caused by not following the operating instruc-

tions, or any fault acknowledged at the time of

purchase, is not covered by the warranty. Damage

caused by the use of non-original accessories and

consumable material (e.g. sanding pads) is also

excluded. Complaints will only be acknowledged

if the equipment has not been dismantled before

being sent back to the suppliers or to an author-

ised Festool customer support workshop. Store

the operating instructions, safety notes, spare

parts list and proof of purchase in a safe place.

In addition, the manufacturer‘s current warranty

conditions apply.

Note

We reserve the right to make changes to the tech-

nical data contained in this information as a result

of ongoing research and development work.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool LEX 2 150 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool LEX 2 150 3 Manual

Product: