Manual Festool LEX 2 150 3 (page 13 of 70) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499931

Zoom out

Zoom in

1/70

Take care of your tools. l. Keep your tools clean

and sharp for safe and efﬁ cient work. Fol-

low the maintenance instructions and tips on

changing tools. Check the compressed-air

hose regularly and if it becomes damaged,

have it replaced by an approved specialist.

Keep handles dry and free of oil and grease.

Disconnect the compressed-air hose from m.

the compressed-air supply. If the pneumatic

tool is idle, prior to maintenance and when

changing tools such as saw blades, drill bits,

cutting tools.

Remember to remove keys. n. Check that the

key and adjustment tools have been removed

before switching the tool on.

Avoid unintentional starting. o. Do not carry a

pneumatic tool that is connected to a com-

pressed-air supply with your ﬁ nger on the

trigger. When connecting the compressed-air

hose to a compressed-air supply, make sure

that the switch is not activated.

Stay alert. p. Keep your eyes on your work. Use

common sense. Do not use the pneumatic

tool if you are not able to concentrate properly.

Operating and maintenance personnel must

be physically strong enough to handle the size,

weight and power of the machine.

Check the pneumatic tool for possible dam-q.

age. Before continuing to use the pneumatic

tool, carefully examine safety devices and

slightly damaged components and make sure

that they function correctly and as speciﬁ ed.

Check whether moving components function

correctly and do not seize, and whether any

components are damaged.

All components must be ﬁ tted correctly and

meet all requirements to ensure that the

pneumatic tool operates correctly.

Damaged safety devices and parts should be

repaired or replaced by an authorised service

centre unless otherwise speciﬁ ed in the oper-

ating instructions. Damaged switches must be

replaced by an authorised service centre.

Do not use pneumatic tools with faulty switch-

es (machine cannot be switched on or off).

Caution! r. Only use accessories and auxiliary

devices that are listed in the operating manu-

al or that are recommended by the manufac-

turer (catalogue).

Using other tools or accessories can pose a

risk of injury.

Have your pneumatic tool repaired by a qual-s.

iﬁ ed specialist. This pneumatic tool corre-

sponds to the relevant safety regulations. Re-

pairs should only be carried out by a qualiﬁ ed

specialist. The operator is otherwise at risk

of an accident.

Only trained and qualiﬁ ed persons are per-t.

mitted to set up, adjust and operate this air

tool. Persons without the relevant qualiﬁ ca-

tions and training are more likely to cause ac-

cidents.

This air tool may not be modiﬁ ed. u. Modiﬁ ca-

tions may reduce the effectiveness of safety

devices and pose a greater risk to operating

personnel.

Hold the machine correctly.v. Prepare to coun-

teract normal or sudden movements - hold

the machine with both hands.

2.2 Machine-related safety instructions

- The manufacturer’s handling and processing

instructions must be observed without fail if

explosive or self-igniting dusts are likely to oc-

cur during sanding.

- If dust dangerous to health is produced during

sanding, the machine should be connected to

an appropriate extraction device and the safety

regulations that apply to the working material

should be observed.

- The operating pressure should not exceed 6.5 bar.

- The machine should only be operated with sand-

paper. Grinding wheels and parting grinder discs

are not permitted.

- Only work with correctly processed compressed air.

Using the Festool service unit VE guarantees this.

- Only use original Festool accessories.

- Wear suitable protection such as ear protection,

safety goggles, a dust mask for work which gen-

erates dust, and protective gloves when working

with raw materials and when changing tools.

- The permissible rotational speed of the acces-

sory must be at least as high as the maximum

speed speciﬁ ed on the machine. Accessories

that rotate faster than the permissible level can

rupture.

- Proceed with caution in unfamiliar surround-

ings that may contain electricity or other supply

cables that harbour hidden dangers. Make sure

that there are no electrical cables, gas pipelines

or similar that, if damaged, could pose a hazard

when the machine is used.

2.3 Residual risks

In spite of compliance with all relevant design

regulations, dangers may still present them-

selves when the machine is operated, e.g.:

• Workpiece parts being thrown off,

• Parts of damaged tools being thrown off,

• Noise emission,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool LEX 2 150 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool LEX 2 150 3 Manual

Product: