573119

Festool HK132E Manual

19
Zoom out
Zoom in
Previous page
1/114
Next page
19
ance with EN 60 745:
a
h
= 3.1 m/s
2
Uncertainty K = 1.5 m/s
2
The specifi ed emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads dur-
ing operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately.
Take note of idling and downtimes of machine!
6 Commissioning and Operation
WARNING
Risk of accident if the machine is operated us-
ing unauthorised voltages or frequencies.
The mains voltage and the frequency of the
power source must correspond with the
specifi cations on the machine’s name plate.
In North America, only Festool machines with
the voltage specifi cations 120 V/60 Hz may
be used.
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket before
performing any type of work on the machine.
Adjustment of the riving knife
WARNING
Risk of injury, if the riving knife is not correctly
adjusted.
The riving knife [1-11] must always be used for
safety reasons. The riving knife prevents the saw
blade from becoming jammed when making length-
wise cuts.
Loosen screw [1-12], adjust the riving knife [1-11]
and retighten the screw (see figure).
Check the function of the swinging guard [1-9].
Switching On/Off
Switching On:
Press the safety button [1-14].
Press the on-off switch [1-13] and hold depressed.
Note: The on-off switch cannot be locked on.
Switching Off:
Release the on-off switch [1-13].
7 Adjustment
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket before
performing any type of work on the machine.
7.1 Electronic Motor Control
Soft start
The electronically-controlled soft start ensures that
the tool starts without jerking and requires only a
small starting current (weaker fuses required).
Constant speed
The motor speed is electronically stabilised. This
enables a constant cutting speed even under a
heavy load.
Overload protection
In cases of extreme overload (rip cutting, use of
blunt saw blades) the power consumption may con-
siderably exceed the permissible rated value. In this
case an electronic overload device protects the mo-
tor from burning out. The motor is hereby switched
of by an “electronic safety clutch” and re-starts as
soon as the load is removed.
Temperature protection
Extreme overload in continuous operation causes
the motor to heat up. An electronic temperature
monitoring device is fi tted to prevent overheat-
ing (motor burn-out). The electronic safety device
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool HK132E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool HK132E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info