778534
24
Zoom out
Zoom in
Previous page
1/164
Next page
saw blades must not be used to saw cement-
bonded fibreboard.
Colour Material Symbol
Yellow Wood
Red Laminate, mineral ma
terial
HPL/TRESPA
®
Green Plaster- and cement-
bonded chipboard and
fibreboard
Blue Aluminium, plastic
"$3:-
7.6 Changing the saw blade
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing any work on the
machine.
WARNING
Risk of injury from hot and sharp insertion
tool
Do not use any blunt or faulty insertion
tools.
Wear protective gloves when handling an
insertion tool.
Wear antistatic safety shoes when chang
ing tools.
Removing the saw blade
Swivel saw to 0° position before replacing
the saw blade and set maximum cutting
depth.
Position saw on motor cover when replac
ing .
Turn the lever [4-3] as far as the stop.
Open the screw [4-7] using the Allen
key [4-2].
Hold the pendulum guard open [4-6] only
with retractor lever [4-4].
Remove the saw blade [4-8].
Inserting the saw blade
WARNING! Check the screws and flange for
contamination and only use clean and undam
aged parts.
Insert the new saw blade.
WARNING! The direction of rotation of the
saw blade [4-9] and saw [4-5] must match.
Serious injuries may occur in the event of
non-compliance.
Insert the outer flange [4-10] so that the pin
engages in the recess on the inner flange.
Release retractor lever [4-4] and allow the
pendulum guard [4-6] to swivel back to its
final position.
Tighten the screw [4-7].
Reposition the lever [4-3].
WARNING
Risk of injury
If a clamping flange is loose, the cutting
edges of the saw blade may break off, and if
a screw is loose, the saw blade may become
detached.
Whenever you replace a saw blade, always
check that it is securely in place.
7.7 Dust extraction
WARNING
Health hazard posed by dust
Always work with an extractor.
Comply with national regulations.
When sawing carcinogenic materials, al
ways connect a suitable extraction mobile
in accordance with national regulations. Do
not use the chip collection bag.
Independent extraction
Secure the connection piece of the dust
collection bag at the extractor connector
with a clockwise rotation.
To empty, remove the connection piece of
the dust collection bag from the extractor
connector with an anti-clockwise rotation.
Festool mobile dust extractor
A Festool mobile dust extractor with a suction
hose diameter of 27/32 mm or 36 mm (36 mm
recommended due to the reduced risk of clog
ging) can be connected to the extractor connec
tor .
The adapter on a 27 diameter suction hose is
inserted into the angle adapter . The adapter on
a 36 diameter suction hose is inserted over the
angle adapter .
CAUTION! A static charge may build up if no
antistatic suction hose is used. The user may
receive an electric shock and the power tool's
electronics may be damaged.
English
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool HK 85 EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool HK 85 EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info