574920
13
Zoom out
Zoom in
Previous page
1/99
Next page
13
Original instruction
GB
1 Safety Instructions
1.1 General Safety Instructions
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fi re and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1.2 Safety instructions specifi c for the respective tool
- Hold power tool by insulated gripping surfaces, when performing an operation
where the fastener may contact hidden wiring. Fasteners contacting a “live”
wire may make exposed metal parts of the power tool “live” and could give the
operator an electric shock.
- This charger can be used by children of 8 years and upwards and persons with
impaired physical, sensory or mental abilities, or insuffi cient experience or
knowledge, providing they are supervised or have been instructed in the proper
use of the appliance and understand the risks involved. Children are not per-
mitted to play with the appliance. Children must not carry out cleaning tasks
or maintenance unless they are supervised.
Wear suitable protection: such as ear protection, safe-
ty goggles, a dust mask for work which generates dust,
and protective gloves when working with raw materials
and when changing tools.
- Take care when drilling into walls as there is a danger of rupturing concealed
gas/water pipes or cutting through power cables.
- Prevent metal parts (e.g. metal chips) or fl uids from entering the charger!
- Do not use battery packs or chargers from other manufacturers!
- Protect the battery pack from excessive heat or constant heat sources such as
sunlight or naked fl ames!
- Never use water to extinguish burning li-ion battery packs! Use sand or a fi re
blanket.
- Check the plug and the cable regularly and should either become damaged,
have them replaced by an authorised after-sales service workshop.
- Connecting the auto feed attachment and drywall screwdriver results in a de-
vice, which is subject to the safety regulations and instruction for the drywall
screw driver.
- Only for AS/NZS: The tool shall always be supplied via residual current device
with a rated residual current of 30 mA or less.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DWC 18-4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DWC 18-4500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info