574920
15
Zoom out
Zoom in
Previous page
1/99
Next page
15
4 Machine features
[1-1] Bit storage
[1-2] Switch
[1-3] Forward / reverse switch
[1-4] AUTO/MAN switch
[1-5] Depth stopper
[1-6] Bit
[3-1] LED
[3-2] Cable holder
[3a] Wall mount
The accessories shown or described do not have
to be included with the supplied tool. The speci-
ed illustrations appear at the beginning of the
Operating Instructions.
5 Intended use
The drywall screwdriver is designed for the fol-
lowing works:
Main application Screw types Type
DWC 18-2500
DWC 18-4500
Gypsum plas-
ter boards on
metal profi le rails
(≤ 0.88 mm)
Drywall screws
with fi ne thread
×
Gypsum plas-
ter boards on
metal profi le rails
(≤ 2.25 mm)
Drywall screws,
self-drilling
×
Gypsum plaster
boards on wooden
constructions
Drywall screws
with coarse
thread
×
Gypsum fi bre
boards on metal
and wooden con-
structions
Drywall screws
with milling ribs
×
Chip boards/OSB
on wooden con-
structions
Wood construc-
tion and chip
board screws up
to
5 mm
×
Charger TCL 3 suitable for
charging Festool battery packs: BP, BPS and
BPC (NiMH, NiCd, li-ion are recognised auto-
matically.)
indoor use only.
The user is liable for improper or non-in-
tended use; this also includes continuous
industrial operation.
6 Commissioning
6.1 Charger cable holder [3-2]
Unwind the cable completely from the re-
cess before using the charger.
6.2 Changing the battery pack
Removing the battery pack [2 A]
Inserting the battery pack [2 B]
Battery pack is ready for use immediately upon
delivery and can be charged at any time.
6.3 Charging the battery pack [3]
The LED [3-1] on the charger indicates the re-
spective operating status of the charger.
LED yellow – lit continuously
Charger is ready to use.
LED green – fl ashing quickly
Battery pack is charged to max-
imum capa city.
LED green – fl ashing slowly
Battery pack is charged with re-
duced current, LiIon is charged
to 80 %.
LED green – lit continuously
Charging is complete or is not
restarted as current charge
status is greater than 80%.
LED red – lit continuously
Battery temperature is outside
the permitted range.
LED red – fl ashing
General fault display, e. g. in-
complete contact, short circuit,
battery pack faulty, etc..
7 Power tool settings
Setting must be done only when the power tool
is turned off and will be accepted only after
restarting it.
6.1 Changing the direction of rotation [1-3]
Move switch from right to left = clockwise rotation;
Move switch from left to right = anticlockwise ro-
tation.
8 Tool holder, attachments
8.1 Bit holder
The bit holder is used for fast replacement of bits.
CAUTION
Risk of cutting injuries when changing the tool!
Wear protective gloves!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DWC 18-4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DWC 18-4500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info