Manual Festool DTSC 400 Li (page 16 of 88) (All languages)

778634

Zoom out

Zoom in

1/88

DTSC 400 Li, RTSC 400 Li

7.2 Changing sanding pad [4a]

An optimal work result can only be achieved

using original accessories and consumables.

The use of non-original accessories or con-

sumables invalidates the right to claim under war-

ranty.

If the StickFix coating on the sanding pad has worn

out, the entire sanding pad can be replaced:

Undo the four screws.

Remove the sanding pad by pulling it down-

wards.

Attach the new sanding pad.

Use four screws to tighten it by hand (2.5 Nm).

7.3 Attaching sanding accessories using

StickFix [4b]

The suitable StickFix sandpaper and StickFix sand-

ing cloth can be attached quickly and simply to the

StickFix sanding pad.



Affix the self-adhesive sanding accessory to the

sanding pad.

7.4 Dust extraction

Integral dust extractor with long-life dust bag

As standard, the sanders are equipped with an inte-

gral dust extractor. The sanding dust is extracted

through extraction openings in the sanding pad and

is collected in the dust bag.

Installing the dust bag [5]

Slide the dust bag onto the machine until it

clicks into place.

If the suction power is decreasing, empty the

dust bag.

Press the dust bag onto the actuating elements.

Remove the dust bag by moving it towards the

rear.

Open the flap on the dust bag.

Empty the dust bag and dispose of the waste.

Dust extraction with Festool's mobile dust ex-

tractor

To prevent having to frequently empty the dust bag

when carrying out sanding work for a long period of

time, you can connect Festool's mobile dust ex-

tractor (with an extraction hose diameter of 27 mm)

to the extractor connection piece

[1-4]



The start-up mode switches the mobile dust ex-

tractor on as soon as you switch the orbital

sander on. The start-up mode only works in

conjunction with the mains adapter.

Recommendation:

Use an antistatic suction hose.

This helps reduce the electric charge.

7.5 Edge protector [6]

The edge protector

[1-7]

prevents the sanding pad

circumference from coming into contact with a sur-

face (e.g. when sanding along a wall or a window),

thus preventing back-kick of the machine, or ma-

chine damage.

Push the edge protector into the groove on the

machine.

Slot the two ends of the edge protector into

place until they click.

Sanding work Adjusting

wheel set-

ting

– Sanding with max. abrasion

– Sanding off old paint

– Sanding of wood and veneered surface

prior to paintwork

– Intermediate sanding of paintwork on sur-

faces

5 - 6

– Sanding thinly applied undercoat

– Sanding wood with sanding cloth

– Edge breaking on wooden parts

– Smoothing primed wooden surfaces

4 - 5

– Sanding solid wood and veneered edges

– Sanding rebate of windows and doors

– Intermediate sanding of paintwork at edg-

– Light sanding of natural wood windows

using sanding cloth

– Smoothing wooden surfaces using sand-

ing cloth before staining

– Rubbing or removing excess limestone

residue using sanding cloth

3 - 4

– Intermediate sanding of paintwork on

stained surfaces

– Cleaning natural wood window rebate us-

ing sanding cloth

2 - 3

– Sanding stained edges

– Sanding of thermoplastics

1 - 2

WARNING

Dust hazard



Dust can be hazardous to health. Always work

with a dust extractor.



Always read applicable national regulations be-

fore extracting hazardous dust.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool DTSC 400 Li in the language / languages: All languages as an attachment in your email.

The manual is 22.47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool DTSC 400 Li Manual

Product: