778812
17
Zoom out
Zoom in
Previous page
1/126
Next page
17
Dia cutting system DSC-AG 125
1 Technical data
Exhaust Cover DCC-AG 125
Tool 125 mm
Disc thickness
with a bar max. 3 mm
without a bar max. 6.5 mm
Cut depth (without a guide bar) 27 mm
Exhaust hose 27/36 mm
Weight 2.2 kg
Angular grinder AG 125-14 DE
Voltage 220 – 240 V~
Frequency 50 / 60 Hz
Input 1400 W
Idle revolutions 3500 - 11000 min–1
Peripheral velocity 80 m/s
Grinding spindle thread M 14
Limits to interaction current
Constant electronics
Heat protection
Weight 2,3 kg
Protection level II /
2 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Read the instructions
Not to be included in municipal refuse
Advice or tip
3 Control elements
[1-1] Arresting button
[1-2] Exhaust Cover
[1-3] Power cable
[1-4] Angular grinder
[1-5] Switch
[1-6] Threading for clamping and additional
handle
[1-7] Spindle locking plunger
[1-8] Rollers
[1-9] Screw for setting bar clearance
[1-10] Bar guide
[1-11] Gear box
[1-12] Bar guide
[1-13] Cut indicator
[1-14] Additional handle
[1-15] Speed control
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
4 Intended use
Consisting of an angle grinder and extraction
hood, the Dia cutting system is designed for
grooving and cutting into concrete or stone ma-
terials without the use of water.
The user proper is responsible for improper us-
age.
5 Notes on Safety Prevention
5.1 General safety instructions
WARNING! Read all safety warnings,
instructions, illustrations and specifi ca-
tions provided with this power tool. Failure
to follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Safety instructions for all operations
General safety instructions for grinding, abra-
sive cutting and wire brushing:
a) This power tool is intended to function as
grinding, sanding with sandpaper, wire brush-
ing and abrasive cutting. Read all safety warn-
ings, instructions, illustrations and specifi ca-
tions provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
b) Operations such as polishing is not recom-
mended to be performed with this power tool.
Operations for which the power tool was not
GB
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DSC-AG 125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DSC-AG 125 in the language / languages: All languages as an attachment in your email.

The manual is 7.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info