498004
18
Zoom out
Zoom in
Previous page
1/116
Next page
18
DF 700 EQ
GB
Observe the following instructions:
X
To ensure constant air circulation, always
keep the cooling air openings in the hous-
ing clean and free of blockages.
X
Clean the guides [3-1] and [3-6] of dust
deposits.
X
Oil the guides regularly and lightly with
resin-free oil (e.g. sewing machine oil).
L
We recommend an annual inspection and/
or a check after approx. 100 operating
hours at an authorised customer service
workshop. This is for the safety of the
user and the value stability of the power
tool.
10 Troubleshooting
11 Accessories
Use only original Festool accessories and
Festool consumable material intended for
this machine because these components are
designed specifically for the machine. Using
accessories and consumable material from
other suppliers will most likely affect the
quality of your working results and limit any
warranty claims. Machine wear or your own
personal workload may increase depending
on the application. Protect yourself and your
machine, and preserve your warranty claims
by always using original Festool accessories
and Festool consumable material!
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
Festool provides comprehensive accessories
which allow you to use your machine effec-
tively and for diverse applications, e.g.:
Handrail fence RA-DF 500/700
Cross stop QA-DF 500/700
Stopper LA-DF 500/700
Assembly instructions are included at the
end of the operating manual.
12 Disposal
Do not throw the power tool in your house-
hold waste! Dispose of machines, accesso-
ries and packaging at an environmentally re-
sponsible recycling centre. Observe the valid
national regulations.
Fault Cause Solution
Burns Blunt cutter Use sharp cutter
Dowel hole too narrow.
DOMINO dowel cannot be
jointed.
a.Blunt cutter
b.Deposits (e.g. chippings in
the dowel hole)
a.Use sharp cutter
b.Remove deposit and work
with dust extractor
Widening of the dowel hole
with 8 mm cutter
Routing depth too large
(larger than 50 mm)
Reduce routing depth
(max.50 mm)
Splinters at edge of dowel
hole
Excessive feed rate Reduce feed rate
Dowel hole not parallel to
workpiece edge
Workpiece has shifted during
processing
Secure workpiece properly
Tool cannot be loosened dur-
ing tool change
Spindle lock not functioning Twist spindle against the tool
using an open-ended spanner.
If this occurs several times
contact the after-sales service
department.
The positions of the dowel
holes which are created with
one of the left and one of
the right stop pins do not
match precisely.
The stop pins are selected
different on the right and
left.
Select the same stop pins on
the left and the right.
DOMINO joining machine
operates irregularly, jerks
a.No dust extractor connect-
ed
b.Rubber buffer [1-1] worn
a.Connect dust extractor
b.Replace rubber buffer (spare
part)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DOMINO XL DF 700 EQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DOMINO XL DF 700 EQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info