574990

Festool CTL MINI 1800W Manual

13
Zoom out
Zoom in
Previous page
1/68
Next page
CTL MINI/MIDI
13
GB
9 Service and maintenance
Customer service and repair
only
through manufacturer or service work-
shops: Please find the nearest address
at:
www.festool.com/Service
Use only original Festool spare parts!
Order No. at:
www.festool.com/Service
Clean the level sensors
[4-1]
and empty the dirt
trap
[1-9]
regularly.
Observe the following instructions:
– The manufacturer or an instructed person must
perform a dust test at least once a year to deter-
mine whether the filter is damaged, the machine is
sealed properly and the monitoring features are
functioning correctly.
– Anything that cannot be cleaned must be discarded
in impermeable bags. Observe applicable disposal
regulations!
9.1 Changing the filter bag
Open the locking clips and remove the top section
of the machine
[3]
.
Changing the filter bag
- see printing on filter bag
.
Replace the top section of the machine and close
the locking clips.
A replacement filter bag can be stored in the stor-
age compartment
[2-4]
.
9.2 Changing the filter element
Open the locking clips and remove the top section
of the machine
[3]
.
Turn the top section of the machine so that the fil-
ter element is facing upwards (Fig.
[4]
).
Fold over the handle
[4-2]
and remove the holder
[4-3]
.
Remove the used filter element
[4-4]
and replace
with a new one.
Dispose of the used filter element in accordance
with statutory regulations.
Replace the holder
[4-3]
and fold over the handle
[4-2]
until it latches into place.
Replace the top section of the machine and close
the locking clips.
The order numbers for accessories, filters and
consumables can be found in the Festool cata-
logue or on the internet at www.festool.com.
10 Environment
Do not dispose of the device in house-
hold waste!
Recycle devices, accesso-
ries and packaging. Observe applicable
country-specific regulations.
EU only:
European Directive 2002/96/EC
stipulates that used electric power tools must be col-
lected separately and disposed of at an environmen-
tally responsible recycling centre.
Information on REACh:
www.festool.com/reach
11 EU Declaration of Conformity
We declare under sole responsibility that this product
complies with all the relevant requirements in the fol-
lowing Directives, standards and normative documents:
2006/42/EC, 2004/108/EC, 2011/65/EU, EN 60335-1,
EN 60335-2-69, EN 55014-1, EN 55014-2, EN 61000-
3-2, EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical Docu-
mentation
2013-06-01
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
NOTE
Motor damage
Never operate the extractor without a filter ele-
ment fitted as the motor may become damaged.
EKAT
1
2
3
5
4
Mobile dust extractor Serial no.
CTL MINI 499590, 499591, 499592,
499593, 499594
CTL MIDI 499599, 499600, 499601,
499602, 499603
Year of CE mark: 2013
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTL MINI 1800W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL MINI 1800W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info