574990

Festool CTL MINI 1800W Manual

12
Zoom out
Zoom in
Previous page
1/68
Next page
12
CTL MINI/MIDI
GB
"MAN" switch position
Appliance socket
[1-2]
is connected to the power, the
mobile dust extractor starts.
"Auto" switch position
Appliance socket
[1-2]
is connected to the power, the
mobile dust extractor starts when the connected tool
is switched on.
Insert the plug into an earthed socket.
Pull the plug from the socket when the ma-
chine is not in use and prior to maintenance
and cleaning work.
6.2 Connecting electric power tools
Connect the electric power tool to the appliance
socket
[1-2]
.
6.3 Connecting the suction hose [1A]
Connect the suction hose to the angle adapter
[1-
6]
on the extraction opening
[1-5]
.
7Settings
7.1 Adjusting the suction power
Use the rotary knob
[1-1]
.
7.2 Applying the brake [1B]
Raise the front of the dust extractor slightly.
Push down the brake
[1-13]
until it engages into
position.
Actuate the lever
[1-12]
to release.
7.3 Temperature cut-out
A temperature cut-out switches the mobile dust ex-
tractor off when it reaches a critical temperature to
prevent overheating.
Switch off the mobile dust extractor, allow to cool
for about 5 minutes then switch on again.
Not possible to switch on: contact Festool service
workshop.
7.4 SYSDOC
A Systainer can be secured to the storage area
[1-7]
using the T-LOC latch
[1-8]
. Systainers without a T-
LOC can be secured using four SysDoc latches
[1-3]
.
8Working
8.1 Extracting dry materials
When extracting dust that exceeds the per-
mitted limit values, only extract from a single
machine (electric or air tool).
Observe
the following when extracting dust gener-
ated by operating electric power tools:
Ensure there is adequate ventilation! Observe re-
gional regulations!
Limit values:
exhaust air max. 50% of the clear air
volume
Formula:
room volume V
R
x air renewal rate L
W
8.2 Extracting wet materials/liquids
Remove the filter bag!
Recommendation:
use a special wet filter.
The dust extractor stops automatically when the
maximum level is reached.
After wet extraction, allow the main filter to dry!
8.3 After finishing work
Switch off the mobile dust extractor and pull out
the mains plug.
Wind up the mains power cable.
Empty the dirt trap.
Place the suction hose
[2-1]
and mains power ca-
ble
[2-2]
in the top section. Insert the mains cable
through the recess
[2-3]
.
Vacuum and wipe off the inside and outside of the
mobile dust extractor.
Place the mobile dust extractor in a dry room in-
accessible to unauthorised users.
WARNING
Risk of injury
Observe the maximum appliance socket con-
nected load (see chapter "Technical data")
Switch off the electric power tool.
CAUTION
Hazardous dust
Damage to the respiratory passage
Always use a filter bag!
CAUTION
Escaping foam and fluids
Switch off and empty the machine immediately.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTL MINI 1800W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL MINI 1800W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info