Manual Festool CS70E-S PR (page 20 of 110) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

573130

Zoom out

Zoom in

1/110

EKAT

Use only original Festool spare parts!

Order No. at: www.festool.com/Service

The machine is equipped with special self-dis-

connecting carbon brushes. If they are worn, the

power is interrupted automatically and the ma-

chine comes to a standstill.

Maintain your machine regularly to make sure it

functions reliably:

- Use an extractor to remove the dust deposits.

- Keep the guide rods clean and grease regu-

larly.

- Keep the toothed gears behind the rotary han-

dle [2-3] clean.

- Replace worn or damaged table inserts [1-4].

- If wood chips block up the extraction channel

on the lower protective cover, unscrew the ro-

tary knob [5-8] and move the ﬂ ap [5-6] approx.

8 mm to open up a gap so that the blockage is

removed.

- If the blockage is serious or the saw seizes

when the initial cut is made, unscrew the fas-

teners [5-7] using the hexagon wrench so that

the ﬂ ap [5-6] can be opened completely. Close

the ﬂ ap again prior to use.

- After completing work, wind up the power ca-

ble onto the holder [1-3].

- A damper allows the saw unit to retract evenly

along the entire cutting length. If this is not the

case, the damper can be adjusted through the

hole [3-5].

Filter cleaning (CS 70 EB only)

You should clean the air intake ﬁ lter [3-2] if the

temperature monitor (see 7.1) triggers shutdown

cycles more frequently without the machine be-

ing overloaded excessively.

Unscrew the rotary knob [3-1].

Remove the ﬁ lter insert.

Knock off the dust or use an extractor on the

surface of the ﬁ lter.

Insert the ﬁ lter again.

 If damaged, replace the ﬁ lter with a new ﬁ l-

ter cartridge.

10 Disposal

Do not throw the power tool in your household

waste! Dispose of machines, accessories and

packaging at an environmentally-responsible

recycling centre. Observe the valid national reg-

ulations.

EU only: In accordance with European Directive

on waste electrical and electronic equipment

and implementation in national law, used elec-

tric power tools must be collected separately

and handed in for environmentally friendly recy-

cling.

Information on REACh: www.festool.com/reach.

11 EU Declaration of Conformity

Bench-mounted circular saw

and circular trimming saw

Serial no.

CS 70 E 491304, 491305, 493474

CS 70 EB 491302, 491303, 493559

Year of CE mark 1995

We declare under sole responsibility that this

product complies with all the relevant require-

ments in the following Directives, standards and

normative documents:

2006/42/EC, 2004/108/EC, 2011/65/EU, EN

61029-1, EN 61029-2-1, EN 55014-1, EN 55014-

2, EN 61000-3-2, EN 61000-3-3

Festool Group GmbH & Co. KG

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Martin Zimmer

Head of Research, Development and Technical

Documentation

2012-12-19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CS70E-S PR in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CS70E-S PR Manual

Product: