778617
15
Zoom out
Zoom in
Previous page
1/78
Next page
4 Technical data
Cordless drill C 18 Li
Motor voltage 18 V
No-load speed* 1st gear 0 - 450 rpm
1st gear 0 - 1500 rpm
Max. torque Soft material (wood) 27 Nm
Hard material (metal) 45 Nm
Adjustable torque** 1st gear 0.8 - 8 Nm
2nd gear 0.5 - 6 Nm
Chuck clamping range 1.5 - 13 mm
Max. drill diameter Wood 40 mm
Metal 13 mm
Tool holder in drill spindle 1/4’’
Weight (incl. battery pack BP 18 Li 6,2 AS and chuck) as per EPTA procedure
01:2014 2 kg
Weight with Centrotec, without battery pack. 1.0 kg
* Speed specifications with fully charged bat
tery pack.
** The maximum speed is reduced in the lower
torque stages (values in clockwise rotation).
5 Functional description
[1-1] Torque thumbwheel
[1-2] Bit store
[1-3] LED light
[1-4] Gear switch
[1-5] Drilling symbol
[1-6] Screwdriving symbol
[1-7] Screwdriving/drilling selector switch
[1-8] Rotational direction switch
[1-9] On/off switch
[1-10] Belt clip
[1-11] Buttons for releasing the battery pack
[1-12] Insulated gripping surfaces (grey
shaded area)
[1-13] Capacity display button on battery
pack
[1-14] Capacity indicator
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Commissioning
6.1 Belt clip
The belt clip allows a shot-term securing of the
device in the work clothes. Insert the belt clip
on the designated side, right or left, and fix it
with the screw [1a].
6.2 Switching on/off[1-9]
Press = ON, release = OFF
The speed can be infinitely adjusted, rela
tive to the pressure applied to the on/off
switch.
The LED light [1-3] lights up when the on/off
switch [1-9] is pressed.
7 Battery pack
7.1 Changing the battery pack
Inserting the battery pack [2a]
Removing the battery pack [2b]
The battery pack is ready to use straight out of
the box and can be charged at any time.
7.2 Capacity indicator
The capacity display [1-14] indicates the charge
of the battery pack for approx. 2 seconds after
the button [1-13] is pressed:
English
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool C 18 Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool C 18 Li in the language / languages: All languages as an attachment in your email.

The manual is 2.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Festool C 18 Li

Festool C 18 Li Additional guide - All languages - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info