778617
14
Zoom out
Zoom in
Previous page
1/78
Next page
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
Wear suitable personal protective equip
ment: Ear protection and safety goggles.
CAUTION! Power tool can jam and cause
sudden kickback! Switch off immediately!
Hold the power tool firmly in your hand.
Make sure the speed is adjusted correctly
when screwdriving. Be prepared for a high
reaction torque, which may cause the pow
er tool to turn and possibly lead to injury.
Do not use the power tool in the rain or in
damp surroundings. Moisture in the power
tool may cause a short circuit and fire.
Do not lock the on/off switch in place per
manently.
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
2.4 Emission levels
The levels determined in accordance with
EN 62841 are typically:
Drilling
Sound pressure level LPA = 65 dB(A)
Sound power level LWA = 76 dB(A)
Uncertainty K = 3 dB
Fastening
Sound pressure level LPA = 64 dB(A)
Sound power level LWA = 75 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
Drilling in metal ah = 3.6 m/s2
K = 1.5 m/s2
Fastening ah < 2.5 m/s2
K = 1.5 m/s2
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
Cordless drill suitable
for drilling in metal, wood, plastics and
similar materials,
for screwing in and tightening screws.
intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci
dents caused by improper and non-inten
ded use; this also includes damage and wear
caused by continuous industrial operation.
English
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool C 18 Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool C 18 Li in the language / languages: All languages as an attachment in your email.

The manual is 2.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Festool C 18 Li

Festool C 18 Li Additional guide - All languages - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info