390048
8
Zoom out
Zoom in
Previous page
1/62
Next page
8
Belt sander
Technical data BS 75/BS 75 E
Sanding width 75 mm
Belt length 533 mm
Wattage 800/1,010 W
Belt speed
no-load 315/200 – 380 m/min
rated load 265/150 – 320 m/min
Weight of machine 3.8 kg
Degree of protection /II
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Graphical symbols
Caution. Danger!
Read the operating instructions/notes
Wear ear protection!
1 Before starting up, please observe the
following
1.1 Safety note
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, especially
inhaling them, can represent a hazard for operat-
ing personnel or persons in the vicinity. Comply
with the safety regulations that apply in your coun-
try. Connect the electric power tool to a suitable
extraction system.
To protect your health, wear a P2 protec-
tive mask.
- Before doing any work to the machine, fi rst re-
move the plug from the mains.
- Only insert plug when machine is switched off.
- Use the machine only for dry sanding.
- Materials containing asbestos are not to be
worked.
- Always connect to a dust bag or external dust
extraction device.
- When sanding take care the cable does not come
into contact with the sanding belt.
- The damaged cord must be exchanged imme-
diately by a specialist.
- Repairs should only be carried out by qualifi ed
personnel.
- Use only original spare parts.
- Hold power tool by the insulated gripping
surface, because the belt may contact its own
power cord. Contact with a “live” wire will make
exposed metal parts of the power tool “live” and
shock the operator.
1.2 Intended use
All-purpose sander for sanding wood, plastics,
metals and building materials; using the appro-
priate sanding belts, surfaces, edges, lippings
and rebates can be rough or fi ne sanded; with
the Type BS 75 E - Set, using the sanding frame,
high-grade workpiece surfaces such as veneers
etc., can be sanded.
The operation and application of the sander can
be extended with the accessories listed.
Generally accepted accident prevention regula-
tion and the enclosed »Safety Instructions« for
the avoidance of accidents when working with the
electric tools, must be complied with.
The manufacturer is not liable for damages
caused by unauthorized changes or the use of
external accessories with the machine.
The user is liable for damage and injury
resulting from incorrect usage!
1.3 Metalworking
The following precautions are to be taken when
processing metals for safety reasons:
- Connect a residual current operated device in
series before the tool.
- Connect tool to a suitable dust extractor. Wood
dust must be removed from the dust extractor
beforehand – because of the danger of dust
explosion!
- Clean tool regularly of dust accumulations in
the motor housing.
Wear safety glasses when sanding met-
al.
1.4 Noise/vibration information
Measured values determined according to
EN 60745. Typically the A-weighted noise levels
of the tool are:
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool bs 75 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool bs 75 e in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info