724578
11
Zoom out
Zoom in
Previous page
1/32
Next page
8
materials or use the appliance where the following materials are present:
Flammable, Explosive or combustible gases, liquids and dust
particles (reactive dust particles), including gasoline.
Reactive metal dust particles (such as aluminium, magnesium,
zinc) in combination with highly alkaline or acidic detergents.
Undiluted acids and alkalis.
Organic solvents (such as petrol, paint thinners, acetone, heating
oil and other oils).
Burning matches, ash and cigarette butts In addition, these
substances may cause the appliance materials to corrode.
Do not vacuum up any toner dust, which is used in printers,
copiers and fax machines for example, because it is electrically
conductive. In addition, it is possible that it will not be completely
ltered out by the lter system of the Wet and Dry Vacuum and
can be released into the air via the exhaust fan.
This appliance is NOT suitable for vacuuming ne dust which can
be harmful to health and to the safe operation of the appliance.
The ne dust particles, such as sanding plaster, can accumulate
around the HEPA lter which will cause reduced suction and
motor overheating. This may damage the appliance.
Do not use without installing the correct lter for the job required.
Do not continue to use the vacuum when the tank is full of liquid.
Do not vacuum water from containers, such as sinks, tubs, barrels, etc.
Make sure that the correct lter has been inserted securely in
its holder before using the appliance. The wrong lter or an
incorrectly installed lter can cause damage to the appliance and
will immediately void the warranty.
Check the oating safety valve (19) often for free movement.
This Wet & Dry Vacuum has been designed for DIY use in the shed,
workshop or garage.
This Wet & Dry Vacuum is NOT suitable for every day
household vacuuming as this will cause premature damage
to the machine and will void the warranty. This Wet & Dry
Vacuum must NOT be used to replace your household daily
vacuum cleaner.
11


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-tvc125

Reset search

  • I am getting an up to 12v shock from my vacuum after running it for about 3 minutes. Is this just static build up which can be overcome by earthing it or do I toss it out. I thinks its about 10 mouths old. Cheers Richard Submitted on 4-7-2021 at 03:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex TVC125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex TVC125 in the language / languages: English as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info