Manual Ferrex TVC125 (page 10 of 32) (English)

724578

Zoom out

Zoom in

1/32

other condition that may aect the power tool’s operation.

If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are easier

to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the

working conditions and the work to be performed. Use of the

power tool for operations dierent from those intended could

result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean and free from oil

and grease. Slippery handles and grasping surfaces do not allow for

safe handling and control of the tool in unexpected situations.

5. Ser vice

a. Have your power tool serviced by a qualied repair person

using only identical replacement parts. This will ensure that the

safety of the power tool is maintained.

• Never use the vacuum without a lter. Check that the correct lter

is used for the correct application and that the lter is securely

tted at all times.

• The foam lter may only be used for wet vacuuming.

• The HEPA lter may only be used for dry vacuuming.

• Do not vacuum anything that is burning or smoking, such as

cigarettes, matches, hot ashes, or hot coals. Do not vacuum large

fragments of glass and sharp objects.

• This appliance must not be used in areas where a risk of explosion

is present.

• Certain materials may produce explosive vapours or mixtures

when agitated by the suction air. Never vacuum up the following

Specic Safety Instructions

I am getting an up to 12v shock from my vacuum after running it for about 3 minutes. Is this just static build up which can be overcome by earthing it or do I toss it out. I thinks its about 10 mouths old. Cheers Richard Submitted on 4-7-2021 at 03:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex TVC125 in the language / languages: English as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferrex TVC125 Manual

Product: