Manual Ferrex SLM531 (page 28 of 48) (English)

779788

Zoom out

Zoom in

1/48

224cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: info.aldi@positecgroup.com 1300 889 028

MODEL No.: SLM531 • 09/2021 • 10093 (toll free)

L (LOW)

H (HIGH)

the bottom of the rear discharge chute. (Fig. G2)

3. Ensure the side ejector cover (16) is in the closed

position. (Fig. G3)

Do NOT use the side discharge chute (30) when

mulch and mowing.

Adding and Checking the oil

IMPORTANT: The engine of this lawn mower

is packed with NO OIL in the engine. Prior to

starting the engine, Oil MUST be added to the

sump of the engine.

Failure to add sucient oil will result in damage

to the engine which is NOT covered under the

warranty of the lawn mower.

On a new lawn mower, the engine needs to be

lled with 500ml of SAE 10W/30 engine oil. We

recommend

FERREX® PRO

Full Synthetic 4 Stroke Oil.

Each time the lawn mower is used, the oil level

should be checked and if low, add sucient oil

to ensure the oil level is to the full mark on the

dipstick.

1. Position the lawn mower on a at and level

surface. Clean the area directly around the oil

ller cap/dipstick (19).

2. Remove the oil ller cap/dipstick (19) by turning

approximately a quarter turn in an anti clockwise

direction and lift the cap (19) outwards. (Fig. H1

& H2)

3. Clean the oil ller cap/dipstick (19) with a clean

cloth, cleaning away any visual oil.

4. FOR A NEW LAWN MOWER, add 500ml of 4

stroke SAE 10W/30 engine oil.

5. Insert the oil dipstick (19) back and secure the oil

ller cap/dipstick (19) by turning approximately a

quarter turn in a clockwise direction.

Preparing for Operation

Hi,WHAT PART NUMBER IS THE DRIVE SELF PROPELLED BELT FOR THIS FERREX SLM531.WHAT IS THE BEST WAY TO REPLACE BELT?
THANK YOU
REGARDS STEPHEN Submitted on 3-2-2025 at 07:55
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SLM531 in the language / languages: English as an attachment in your email.

The manual is 2.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferrex SLM531 Manual

Product: