779769
18
Zoom out
Zoom in
Previous page
1/27
Next page
1. Place the turbo nozzle on the quick lock 15 of the spray lance in such a way that
the small rectangular elevation fits exactly into the rectangular recess in the
spray lance 16 .
2. Press the turbo nozzle down firmly on the spray lance. The yellow button of the
quick lock clicks once the nozzle is positioned correctly.
Removing the turbo nozzle
1. Stop the washer and move the ON/OFF switch 5 to OFF.
2. Push the trigger 13 until the pressure in the washer has been released.
3. Press the yellow button of the quick lock 15 on the spray lance 16 and pull off
the turbo nozzle 19 .
Fitting the Vario pressure nozzle
The Vario pressure nozzle 20 produces a fan beam at a 30° angle.
1. Place the Vario pressure nozzle on the quick lock 15 of the spray lance in such a
way that the small rectangular elevation fits exactly into the rectangular recess
in the spray lance 16 .
2. Press the Vario pressure nozzle down firmly on the spray lance. The yellow
button of the quick lock clicks if the Vario pressure nozzle is positioned correctly.
3. Turn the Vario pressure nozzle to set the desired water pressure.
Removing the Vario pressure nozzle
1. Stop the washer and move the ON/OFF switch 5 to OFF.
2. Push the trigger 13 until the pressure in the washer has been released.
3. Press the yellow button of the quick lock 15 on the spray lance 16 and pull off
the Vario pressure nozzle 20 .
Fitting the wash brush
The wash brush 17 is suitable for cleaning surfaces delicately.
In the process, the high-pressure jet is used to operate the wash brush; the water
strikes the surface to be cleaned only at lower pressure.
The rotating wash brush head achieves the cleaning effect and the removed dirt is
washed away with the water.
1. Remove the spray lance 16 ,see chapter “Removing the spray lance”.
2. Put the wash brush onto the spray gun 11 .
3. To fix the wash brush, push it slightly downwards and turn it clockwise at the
same time.
Removing the wash brush
1. Stop the washer and move the ON/OFF switch 5 to OFF.
Using the cleaning attachments
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex Q1W-SP07-2200A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex Q1W-SP07-2200A in the language / languages: English as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info