779769

Ferrex Q1W-SP07-2200A Manual

14
Zoom out
Zoom in
Previous page
1/27
Next page
3. Check whether the washer or the individual parts exhibit damage. If any
damage is visible, do not use the washer. Contact the manufacturer at the
service address specified on the warranty card.
Assembling the washer
WARNING!
Rist of injury!
The washer could be inadvertently activated and cause injury.
- Ensure that the washer is disconnected from the mains before
you assemble the washer.
WARNING!
Health hazard!
The washer must not be directly connected to the drinking water
network because the return flow of water poses a risk to the
drinking water.
- Use a water backflow preventer or an inlet hose set approved
in accordance with IEC 61770.
- Cleaning car motors and other objects contaminated by oil
and various lubricants is permissible only on such areas
where the waste water is diverted by an oil separator.
- Water that has flowed through the backflow preventer is
considered unfit for drinking.
1. Insert the plug connection of the high-pressure hose 2 in the connection 12
on the handle of the spray gun 11 .
2. Insert any given cleaning nozzle onto the spray gun. See chapter “Using the
cleaning attachments”.
3. Connect a water inlet hose with a quick-lock coupling (not included in the
package contents) with the screw connection for the water inlet hose 7. The
water temperature may amount to no more than 40 °C.
4. Insert the mains plug into a properly installed socket with an earthing contact
and alternating voltage in accordance with the washer’s rating plate.
Before first use
14
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex Q1W-SP07-2200A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex Q1W-SP07-2200A in the language / languages: English as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info