724604
22
Zoom out
Zoom in
Previous page
1/40
Next page
45cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 53942 • 09/2018 • PM2006H
(toll free)
20
10848
.
10/2019
.
PM2006H
1300 889 028
info.aldi@positecgroup.com
Fuelling the Chainsaw
WARNING: Always ensure the engine is
turned o before undertaking this task.
Never add fuel to a machine with a running or hot
engine. Move at least 15m away from the refuelling
site before starting engine.
Do not smoke when refuelling or operating the
chainsaw.
1. Rest the chainsaw on its side so the fuel tank (8) is
facing up, on the ground or a secure surface and
wipe any debris from around the fuel tank (8).
2. Unscrew the fuel tank cap (9) (anti clockwise
direction), and pour the fuel and oil mixture into
the tank with the aid of a funnel, to about 80% of
its capacity (Fig S).
NOTE: Be careful not to spill any mixture. If this
happens, wipe the spill with a clean rag.
3. Secure fuel tank cap (9) (Fig T).
Adding Chain Oil
WARNING: Always ensure the engine is
turned o before undertaking this task.
WARNING: Never start work unless the chain
(20) and guide bar (19) are lubricated.
1. Place the chainsaw on its side with the oil tank
cap (7) facing up. Unscrew and remove the oil
tank cap (7) (anti clockwise direction) (Fig U).
2. Using a funnel, ll the oil tank (6) to 80% capacity
with chain oil (Fig V).
3. Fasten the oil tank cap (7) and wipe up any oil
spillage.
WARNING: Do not start the engine whilst the
chainsaw hangs from one hand. This is very
dangerous as the chain (20) may come in
contact with your body and the starting action is not
controlled (Fig W).
S.
V.
U.
LOOSEN
Preparation
T.
LOOSEN
TIGHTEN
TIGHTEN
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex PM2006H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex PM2006H in the language / languages: English as an attachment in your email.

The manual is 10 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info