724590
18
Zoom out
Zoom in
Previous page
1/40
Next page
16
Digital Inverter Generator with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com 1300 889 028
MODEL: №. XG-KF2000 • 03/2020 • 700069 (toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
Digital Inverter Generator with Pure Sine Wave
MODEL: №. XG-KF2000 • 03/2020 • 700069
NOTE: These gures are indicative only. Ensure you check the total rating
of the appliance to be used before connecting to the generator. Refer to
page 23.
Always connect the largest appliance you want to run rst allowing it
time to draw current to start . After 20-30 seconds connect the second
appliance.
NOTE: Ensure to reduce load when connecting appliances to the
generator by using smaller rated appliances or reducing the number of
appliances in use.
Preparation Information
Indicators
This generator has three main LED indicators to indicate to the operator
various conditions as follows:
1. Low oil indicator (Fig A)
The low oil indicator light (4) is a red
LED and will illuminate when the oil
level of the generator is too low. The
generator will stop operating within
10 seconds if the red light comes on.
The red LED will illuminate when the
generator is being attempted to start
if the oil is low, i.e. when the cord is being pulled, the red LED will glow if
there is insucient oil. In this condition, the generator will not start. In this
condition you need to add oil for the generator to operate.
2. Load Status indicator (Fig B)
The red load status indicator light
(5) advises the operator that a fault
has been detected and the power
supply to the control panel has been
interrupted. When the red load status
indicator is operating red, there is NO
240Va.c. available to the control panel.
NOTE: The engine must be stopped and the issue resolved before the
power supply will be restored.
A.
B.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex KF2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex KF2000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info