779779
34
Zoom out
Zoom in
Previous page
1/38
Next page
AUS
Text
30 AFTER SALES SUPPORT
support@scheppach.com.au 1300 855 831
MODEL: HL520 PRODUCT CODE: 700726 04/2021 AUS Hotline Costs: Local rate for landline calls*
*Charges may var y dependent upon net work operator or mobile network provider.
XVI. TROUBLESHOOTING
The table below contains a list of fault symptoms and explains what you can do to reme-
dy the problem if your equipment fails to work properly. If the problem still persists after
working through the list, please contact your nearest service workshop.
m IMPORTANT!
Hint in case of sending the equipment to a service station:
Due to security reasons please ensure that the equipment is sent back free of oil!
Problem Possible Cause Remedy
Motor stops
starting
Overload protection device disen-
gaged to protect the log splitter from
being damaged
Contact a qualied Electrician
Fails to split
logs
a) Log is improperly positioned
b) Size of log exceeds the capacity of
the machine
c) Splitting Wedge cutting
edge is blunt
d) Oil leaks
a) Refer to ”Operation” section
to perfect log loading
b) Reduce log size before
operating
c) Sharpen cutting edge
d) Locate leak(s) and contact
your dealer
Log pusher
moves jerkily,
making unfa-
miliar noise or
vibrating a lot
Lack of hydraulic oil and excessive air
in the hydraulic system
Check oil level for possible
relling
Contact your dealer
Oil leaks
around the
cylinder ram
or from other
points
a) Air sealed in hydraulic system while
operating
b) Venting Screw is not tightened
before moving the log splitter
c) Oil drain bolt is not tight
d) Hydraulic control valve assembly
and/or seal(s) worn
a) Loosen Venting Screw by
some rotations before oper-
ating the log splitter
b) Tighten Venting Screw
up before moving the log
splitter
c) Tighten the oil drain bolt
d) Contact your dealer
Maintenance and repairs
All servicing jobs must be executed by specialized personal under strict observation
of the present operating instructions. Before every work, every possible caution must
be taken: Switch o󰀨 the motor, disconnect the power supply (pull the plug, if neces-
sary). Attach a board to the machine explaining the reason for being out of order:
Machine out of order due to servicing work: Unauthorized people must not come
close to the machine or switch it on.”
AUS
Troubleshooting
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex HL520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex HL520 in the language / languages: English as an attachment in your email.

The manual is 1.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info