779779
32
Zoom out
Zoom in
Previous page
1/38
Next page
AUS
Text
28 AFTER SALES SUPPORT
support@scheppach.com.au 1300 855 831
MODEL: HL520 PRODUCT CODE: 700726 04/2021 AUS Hotline Costs: Local rate for landline calls*
*Charges may var y dependent upon net work operator or mobile network provider.
XIV. ELECTRICAL CONNECTION
The electrical motor installed is connected and ready for operation. The
connection complies with the applicable Australian standards.
The customer's mains connection as well as the extension cable used must
also comply with these regulations.
Important information
In the event of an overloading the motor will switch itself o󰀨. After a cool-down pe-
riod (time varies) the motor can be switched back on again.
Damaged electrical connection cable
The insulation on electrical connection cables is often damaged.
This may have the following causes:
Passage points, where connection cables are passed through windows or doors.
Kinks where the connection cable has been improperly fastened or routed.
Places where the connection cables have been cut due to being driven over.
Insulation damage due to being ripped out of the wall outlet.
Cracks due to the insulation ageing.
Such damaged electrical connection cables must not be used and are life-threat-
ening due to the insulation damage.Check the electrical connection cables for
damage regularly.
Make sure that the power is switched o󰀨 before inspecting the cable. Electrical
connection cables must comply with the applicable Australian standards and must
be correctly marked. Only use connection cables with the marking ''H05VV-F''.
Replacement cables can only be tted by an approved and certied electrician. If
you are in any doubt please contact the help line at the foot of this page.
AC motor
The mains voltage must be 220 - 240 V~
Extension lines up to a length of 25 m must have a minimum cross section of 1.5
mm², lines with a length exceeding 25 m must have a minimum cross section of
2.5 mm².
Connections and repairs of electrical equipment may only be carried out by an
electrician.
Please provide the following information in the event of any enquiries:
Type of current for the motor
Machine data - type plate
AUS
Electrical connection
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex HL520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex HL520 in the language / languages: English as an attachment in your email.

The manual is 1.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info