779779
18
Zoom out
Zoom in
Previous page
1/38
Next page
14 AFTER SALES SUPPORT
support@scheppach.com.au 1300 855 831
MODEL: HL520 PRODUCT CODE: 700726 04/2021 AUS Hotline Costs: Local rate for landline calls*
*Charges may var y dependent upon net work operator or mobile network provider.
AUS
Safety regulations
m WARNING!
Always unplug the power plug prior to starting any of the maintenance
work described in this manual.
m WARNING!
The voltage must be the same as the voltage specied on the rating
plate.
Keep these regulations in a safe place!
1. WORK AREA
Keep your work area clean and tidy. Disorder and insu󰀩ciently illu-
minated work areas can lead to accidents.
Do not use this tool in a potentially explosive environment containing
combustible liquids, gases or dust. Electric tools generate sparks,
which can in turn ignite dust or vapors.
Keep children and other persons away from the electric tool while it
is being used. Allowing yourself to get distracted can cause you to
lose control of the tool.
2. ELECTRICAL SAFETY
Attention! The following basic safety measures must be observed
when using electric tools for protection against electric shock, and
the risk of injury and re. Read all these notices before using the
electric tool and keep the safety instructions for later reference.
The tools connector plug must be able to t into the socket outlet.
Do not modify the plug in any way! Do not use adapter plugs in
conjunction with electrically grounded tools. Unmodied plugs and
matching socket outlets reduce the risk of an electric shock.
Avoid touching grounded surfaces, such as those of pipes/tubes,
heaters, cookers and refrigerators. There is an increased risk of
getting an electric shock if you are electrically grounded.
Keep the tool away from rain and moisture/wet conditions. Pene-
tration of water into an electric tool increases the risk of an electric
shock.
Do not use the cable to carry the tool, hang it up or pull the plug out
of the socket. Keep the cable away from sources of heat, oil, sharp
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex HL520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex HL520 in the language / languages: English as an attachment in your email.

The manual is 1.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info