779779
16
Zoom out
Zoom in
Previous page
1/38
Next page
12 AFTER SALES SUPPORT
support@scheppach.com.au 1300 855 831
MODEL: HL520 PRODUCT CODE: 700726 04/2021 AUS Hotline Costs: Local rate for landline calls*
*Charges may var y dependent upon net work operator or mobile network provider.
AUS
Intended use
IV. INTENDED USE
Warning! This electric tool generates an electromagnetic eld during operation.
This eld can impair active or passive medical implants under certain conditions. In
order to prevent the risk of serious or deadly injuries, we recommend that persons
with medical implants consult with their physician and the manufacturer of the medi-
cal implant prior to operating the electric tool.
The hydraulic log splitter may only be used in a horizontal position.
Wood may only be split in a horizontal position along the bre.
The maximum split wood length is 52 cm.
In no way may the machine be used for any other purposes than splitting rewood.
1. The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse.
2. The user / operator and not the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
3. To use the equipment properly you must also observe the safety information, the
assembly instructions and the operating instructions to be found in this manual.
4. All persons who use and service the equipment have to be acquainted with this
manual and must be informed about the equipment’s potential hazards.
5. It is also imperative to observe the accident prevention regulations in force in your
area.
6. The same applies for the general rules of health and safety at work.
7. The manufacturer will not be liable for any changes made to the equipment nor for
any damage resulting from such changes.
Even when the equipment is used as prescribed it is still impossible to eliminate
certain residual risk factors. The following hazards may arise in connection with the
machine’s construction and design:
Dry and dried-up wood may jump up when being split and injure the face of the
operator. Adequate protective clothes to be worn!
Wooden pieces produced during splitting may fall down and injure legs of the
operator.
When splitting wood, parts of body may be crushed or separated due to hydraulic
knife lowering.
There is a risk of branchy wood getting stuck when being split. Please be advised
that wood being separated is under heavy pressure and your ngers may get
squeezed in the gap.
Caution! Pieces of wood cut at the right angle to be split only! Diagonally cut piec-
es of wood may slip when cutting! This may cause personal injury or damage to
the splitter knife especially when using the gap extension by Splitting Wedge!
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex HL520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex HL520 in the language / languages: English as an attachment in your email.

The manual is 1.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info